![]() |
If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
![]()
Greetings all,
Thought I'd pass on some shots that were taken of the 787 while it was being towed from the assembly hangar to get painted. Here is the link: http://seattlepi.nwsource.com/busine...liner27ww.html Please click on the photo gallery link for all the available pics. Enjoy Rick |
#2
|
|||
|
|||
![]()
Those are BIG engines!!!
RL Anderson wrote: Greetings all, Thought I'd pass on some shots that were taken of the 787 while it was being towed from the assembly hangar to get painted. Here is the link: http://seattlepi.nwsource.com/busine...liner27ww.html Please click on the photo gallery link for all the available pics. Enjoy Rick |
#3
|
|||
|
|||
![]()
john smith wrote:
Those are BIG engines!!! RL Anderson wrote: Greetings all, Thought I'd pass on some shots that were taken of the 787 while it was being towed from the assembly hangar to get painted. Here is the link: http://seattlepi.nwsource.com/busine...liner27ww.html Please click on the photo gallery link for all the available pics. Enjoy Rick I thought the windows were supposed to be bigger?? |
#4
|
|||
|
|||
![]()
On Jun 27, 12:28 pm, papafoxtrot wrote:
john smith wrote: Those are BIG engines!!! RL Anderson wrote: Greetings all, Thought I'd pass on some shots that were taken of the 787 while it was being towed from the assembly hangar to get painted. Here is the link: http://seattlepi.nwsource.com/busine...liner27ww.html Please click on the photo gallery link for all the available pics. Enjoy Rick I thought the windows were supposed to be bigger??- Hide quoted text - - Show quoted text - They are, but it is a big airplane... |
#5
|
|||
|
|||
![]()
On Jun 27, 8:39 am, RL Anderson wrote:
Greetings all, Thought I'd pass on some shots that were taken of the 787 while it was being towed from the assembly hangar to get painted. Here is the link: http://seattlepi.nwsource.com/busine...liner27ww.html Please click on the photo gallery link for all the available pics. Enjoy Rick IIRC, it's supposed to fly in like a week or so (7/7/07) isn't it? Jay Beckman PP-ASEL Chandler, AZ |
#6
|
|||
|
|||
![]()
On Jun 27, 2:00 pm, Jay B wrote:
On Jun 27, 8:39 am, RL Anderson wrote: Greetings all, Thought I'd pass on some shots that were taken of the 787 while it was being towed from the assembly hangar to get painted. Here is the link: http://seattlepi.nwsource.com/busine...liner27ww.html Please click on the photo gallery link for all the available pics. Enjoy Rick IIRC, it's supposed to fly in like a week or so (7/7/07) isn't it? Jay Beckman PP-ASEL Chandler, AZ Jay, No, the rollout ceremony is on 7/8/07 (get it?), but first flight isn't until something like September. I have several friends working on the 787, so I'll get the exact first flight date as we get closer. Dean |
#7
|
|||
|
|||
![]()
On Wed, 27 Jun 2007 12:59:53 -0400, john smith wrote
in : Those are BIG engines!!! That's what I was thinking too. http://www.boeing.com/commercial/787...ackground.html Boeing has selected General Electric and Rolls-Royce to develop engines for the new airplane. It is expected that advances in engine technology will contribute as much as 8 percent of the increased efficiency of the new airplane, representing a nearly two-generation jump in technology for the middle of the market. Another improvement in efficiency will come in the way the airplane is designed and built. New technologies and processes are in development to help Boeing and its supplier partners achieve unprecedented levels of performance at every phase of the program. For example, by manufacturing a one-piece fuselage section, we are eliminating 1,500 aluminum sheets and 40,000 - 50,000 fasteners. |
#8
|
|||
|
|||
![]()
On Jun 27, 8:39 am, RL Anderson wrote:
Greetings all, Thought I'd pass on some shots that were taken of the 787 while it was being towed from the assembly hangar to get painted. Here is the link: http://seattlepi.nwsource.com/busine...liner27ww.html Please click on the photo gallery link for all the available pics. Enjoy Rick That's a lot of people to be sitting back-to-knees. Its funny that Airbus shows this is a large plane with lots of room for the pax. The truth is that Airbus does not decide how the seats are spaced, the airline does. -Robert |
#9
|
|||
|
|||
![]()
On Jun 27, 8:39 am, RL Anderson wrote:
Greetings all, Thought I'd pass on some shots that were taken of the 787 while it was being towed from the assembly hangar to get painted. Here is the link: http://seattlepi.nwsource.com/busine...liner27ww.html Potential new name for the 787... Podracer. |
#10
|
|||
|
|||
![]()
Robert M. Gary wrote:
[Snip] That's a lot of people to be sitting back-to-knees. Its funny that Airbus shows this is a large plane with lots of room for the pax. The truth is that Airbus does not decide how the seats are spaced, the airline does. -Robert Here's another site with some great info. http://flightblogger.blogspot.com/ Enjoy Rick |
|
Thread Tools | |
Display Modes | |
|
|
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
Looking for Photos | jls | Home Built | 1 | January 21st 07 10:22 PM |
Dreamliner Nears Production | Jay Beckman | Piloting | 22 | December 6th 06 04:15 AM |
SC Dreamliner Factory | john smith | Piloting | 2 | June 9th 06 06:41 PM |
~ PHOTOS FROM THE FALLUJAH MASSACRE [won't find *these* photos on | TekTeam26 | Military Aviation | 0 | April 12th 04 01:49 AM |
C-150 for photos? | Simone Canosa | Piloting | 17 | December 6th 03 01:49 AM |