![]() |
If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
![]()
About to take a trip down to Gulfport MS (GPT) tomorrow morning.
Ceilings are forecasted to be 300 broken, so I really doubt that I will be mucking around with full procedure approaches in the clag, but while I was studying the approaches into GPT, I am kinda figuring on expecting vectors for the ILS 14 approach based on forecasted winds. Looking at the approach, the IAF is CAESA. Outside the 10 NM ring, it says 2000 no PT, so, I would take it that no procedure turn is authorized, yet, I see the procedure turn barbs just inside the 10 NM ring. Am I reading this correctly that no procedure turns for the ILS is authorized outside this 10NM ring, and if I was to do a full procedure approach that it must be inside the the 10 NM ring??? Or what am I missing? This question is coming up, as when I got my flight briefing, the briefer said, no procedure turn at CAESA from Victor 552 which in my opinion agrees with the approach chart, yet I see the procedure turn barbs outbound 268 and inbound 088 to intercept the localizer. Any assistance in clearing up my question really appreciated. Allen |
Thread Tools | |
Display Modes | |
|
|
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
VOR/DME Approach Question | Chip Jones | Instrument Flight Rules | 47 | August 29th 04 05:03 AM |
A question on Airworthiness Inspection | Dave S | Home Built | 1 | August 10th 04 05:07 AM |
Question | Charles S | Home Built | 4 | April 5th 04 09:10 PM |
Tecumseh Engine Mounting Question | jlauer | Home Built | 7 | November 16th 03 01:51 AM |
Question about Question 4488 | [email protected] | Instrument Flight Rules | 3 | October 27th 03 01:26 AM |