ASA OnTop 8 Pedal Problem

My OnTop 8 is over-responding to my CH pedal input. The pedal input =
moves the sim plane way more than my input and just a little step on the =
pedals, the plane would immediately yaw and then roll the plane into a =
40 - 50 degree blank angle.=20

Anybody knows how to adjust the input level of the pedals?
=20

p.s. Spent $600 to get the OnTop/IP Trainer bundle and CH Yoke/Pedal; IP =
Trainer still freezes frequently, OnTop 8 took half a dozen e-mails and =
2 weeks of my after work time just to get it connected with my CH Yoke & =
Pedals. The techie at ASA must have given up on me as he no longer =
replies to any of the e-mail anymore.

=20

I have forwarded your message to ASA. However, you might give them a call at
1-800-426-8338 and ask for Mark or Craig.

Bob Gardner

"Kevin" wrote in message
...
My OnTop 8 is over-responding to my CH pedal input. The pedal input moves
the sim plane way more than my input and just a little step on the pedals,
the plane would immediately yaw and then roll the plane into a 40 - 50
degree blank angle.

Anybody knows how to adjust the input level of the pedals?


p.s. Spent $600 to get the OnTop/IP Trainer bundle and CH Yoke/Pedal; IP
Trainer still freezes frequently, OnTop 8 took half a dozen e-mails and 2
weeks of my after work time just to get it connected with my CH Yoke &
Pedals. The techie at ASA must have given up on me as he no longer replies
to any of the e-mail anymore.