![]() |
If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
|
Thread Tools | Display Modes |
#11
|
|||
|
|||
![]()
Roger Halstead wrote:
OTOH Frank's 49 makes my 59 look positively modern. Uh, well mine doesn't *exactly* look like a museum piece (any reputable museum at least *washes* their plane occaisonally ;-) On the other hand, the fellow who owns Cannon avionics at Arlington, WA has a A35 which is a few hundred serial numbers newer than mine. I saw it for the first time this weekend, during the airshow. Walking past it I was going to disregard it as one of the newer models, probably a N or a P. Wasn't until I noticed the landing lights that I realized it was an earlier model. Wasn't until I read the data plate I realized it was a massivly modified A model. Long side windows, speed sloped winshield, fully modern panel (complete with avionics worth more than my plane), extended baggage area. It also no longer had an E-series engine it it, although I don't know exactly what it did have. It looked *WAY* more modern than some inverted t-tail thing from 1959 ;-) -- Frank Stutzman Bonanza N494B "Hula Girl" Hood River, OR |
#12
|
|||
|
|||
![]()
On Tue, 13 Jul 2004 04:48:54 +0000 (UTC), Frank Stutzman
wrote: Roger Halstead wrote: OTOH Frank's 49 makes my 59 look positively modern. Uh, well mine doesn't *exactly* look like a museum piece (any reputable museum at least *washes* their plane occaisonally ;-) On the other hand, the fellow who owns Cannon avionics at Arlington, WA has a A35 which is a few hundred serial numbers newer than mine. I saw it for the first time this weekend, during the airshow. Walking past it I was going to disregard it as one of the newer models, probably a N or a P. Wasn't until I noticed the landing lights that I realized it was an earlier model. Wasn't until I read the data plate I realized it was a massivly modified A model. Long side windows, speed sloped winshield, fully modern panel (complete with avionics worth more than my plane), extended baggage area. It also no longer had an E-series engine it it, although I don't know exactly what it did have. It looked *WAY* more modern than some inverted t-tail thing from 1959 ;-) I gota admit that mine is a bit austere inside although it has had a few mods. 1/2 inch Speed sloped windshield, 1/4 inch side windows, extended baggage compartment with long third rear windows, dorsal fin with cabin air inlet. (outlets are like cabin air on DC-9), gap seals, Deshannon flight extender tip tanks, aileron and flap gap seals, complete King silver Crown stack with KNS-80 RNAV (well it was modern 20 years ago G), 260 HP IO-470N, 3-blade Hartzell prop and rudder hinge mode to do away with the rudder spar AD and a bunch of other stuff I don't seem to remember now. On a good day cruise is 180 MPH on 14 GPH at 24 square and... It has less than 4000 hours total time on the airframe. S# CD-2 although all the parts say CD-1. They tell me it was the prototype used to set up the tooling, then taken apart and reassembled on the line. The airframe log shows 30 hours of pre production flight testing. I normally fly it in enough rain to keep it clean although that's a bit hard on the paint. Those thick windows really quiet it down in heavy rain. Roger Halstead (K8RI & ARRL life member) (N833R, S# CD-2 Worlds oldest Debonair) www.rogerhalstead.com |
#13
|
|||
|
|||
![]()
On Tue, 13 Jul 2004 04:36:52 +0000 (UTC), Frank Stutzman
wrote: Rich wrote: Hey! Hey! Hey! Don't nobody go around saying that _I_ fly a Debonair! I fly a gen you wine "V" tail! (My third one!) Sorry, I stand corrected. Rich Hare/Roger Halstead. At least I got the initials correct. :-)) and we all tend to do a little more transposing as we age. Roger Halstead (K8RI & ARRL life member) (N833R, S# CD-2 Worlds oldest Debonair) www.rogerhalstead.com |
#14
|
|||
|
|||
![]()
"The Weiss Family" wrote in message ...
All, I was recently perusing through some of the newer Trade-A-Plane listings, and I saw tons of old Bonanzas. Within the last 3 days of listings, there were probably 10 or more. From previous threads in this newsgroup, I have read that the older Bo's are expensive to maintain, typically due to the high cost on parts. So, I was wondering why the parts are so expensive and/or hard to come by if there are so many planes out there? Does someone have an older Bonanza who could comment on this? There are fewer mechanics who are very expert on taking care of the older ones and mistakes are very expensive. So either you need a real guru or you have to become the expert yourself to make the ownership practical. There is plenty of info available for the enthusiast. Older Bonanzas are NOT that expensive to *maintain.* But if they haven't been cared for since about the 3rd owner, it will be *breathtaking* to bring them up to snuff. So you need a very fine prepurchase. If you keep them well lubricated and rigged, you need very few parts. A friend runs D-1000. It has been the most economical cross country airplane imaginable. Goes about 155kts on 8-9 gph of car gas. Always ready to go. Bill Hale BPPP instructor Adam |
|
Thread Tools | |
Display Modes | |
|
|
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
Wanted: copy of Flying Buyers' Guide 1983 or older | Ren? | Aviation Marketplace | 1 | January 14th 05 06:06 AM |
Glass Cockpit in Older Planes | Charles Talleyrand | Owning | 2 | May 20th 04 01:20 AM |
New law for older airplanes? | Jim B | Owning | 25 | May 13th 04 08:26 PM |
Buying an older airplane | Kai Glaesner | Owning | 39 | April 5th 04 06:54 PM |
Contact cleaning on older Nav radio | Mike Noel | Owning | 4 | September 15th 03 02:28 PM |