![]() |
If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
![]()
I need to get my carb rebuilt. It's a Marvel MA4-5 off an O-540.
Somehow it floods to the point of not running (longer story possibly in another post). I'd like to find out why this is happening so that besides just getting an overhaul I actually know it won't flood again. I don't care if it costs extra for the diagnostic as long as I know who I'm dealing with will find the problem to whatever extent this is possible. Any suggestions on reputable shops and previous experiences would be greatly appreciated. Thanks in Advance for any replies. z |
Thread Tools | |
Display Modes | |
|
|
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
Have you ever experienced carb ice with an injector carb? | flybynightkarmarepair | Home Built | 1 | January 31st 05 01:48 AM |
Induction System Water Problem | Mike Spera | Owning | 1 | January 30th 05 05:29 AM |
Use of Carb Heat | John Kirksey | Piloting | 4 | November 30th 04 07:26 PM |
Carb Temperature Gauge | fly_the_skies | Home Built | 6 | January 14th 04 03:32 PM |
Full before landing checklist in the pattern? | Tony Roberts | Piloting | 70 | November 15th 03 04:50 AM |