![]() |
If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#11
|
|||
|
|||
![]()
Ron Rosenfeld wrote in message . ..
On 20 May 2004 23:13:28 -0700, (Doug) wrote: So I am in the hold at the BJC VOR for the VOR DME approach to 2v2. http://www.naco.faa.gov/d-tpp/0405/09041VDA.PDF At what point do I leave the hold and intercept the 345 radial? I think the reason that there all these answers is that it does not matter. The commentator who said make all turns on the holding pattern side gave accurate guidance. Look at the terrain and guess why they put the hold on the east side. There are a lot of miles between the holding fix and the faf. And all of it is clear for you. So getting established can't be much of a factor. I'd turn most directly to intercept 345 inbound from wherever in the hold I got the approach clearance. Maneuvering south of Jeffco seems to be specifically prohibited by the remark. Since you don't get to review every decision on the internet while flying the approach, wisest is to confer with ATC over what you are going to do when in doubt. Regards, Bill Hale -- who used to be based at 2v2 when you shot the ils into FNL then scud ran over KLMO broadcast station and let down into 2v2. -- not a charted procedure... |
Thread Tools | |
Display Modes | |
|
|
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
Screw hold repair in fabric? | Brian Huffaker | Home Built | 11 | May 29th 04 02:07 AM |
Hold "as published"? | John Clonts | Instrument Flight Rules | 83 | November 13th 03 03:19 PM |
Random Hold Generator... | Tina Marie | Instrument Flight Rules | 0 | November 5th 03 04:21 PM |
Need Hold Harmless Waver for Ultralight or Experimental Sale | Larry Smith | Home Built | 9 | August 19th 03 02:47 AM |
Need a Waiver/ Hold Harmless Agreement for UL / Experimental Sale | Richard_Tonry | Home Built | 2 | August 17th 03 12:58 PM |