A aviation & planes forum. AviationBanter

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Go Back   Home » AviationBanter forum » rec.aviation newsgroups » Owning
Site Map Home Register Authors List Search Today's Posts Mark Forums Read Web Partners

Bad timing...



 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #13  
Old March 9th 07, 12:34 AM posted to rec.aviation.piloting,rec.aviation.owning
Capt. Geoffrey Thorpe
external usenet poster
 
Posts: 790
Default Bad timing...

"Jay Honeck" wrote in message
oups.com...
...
During the preflight I spotted a wet mark under the right wheel pant.
Pointing this out to Mary, we both figured that it was the slush and
ice from inside the wheel pant melting in the 40-degree sunshine. We
had heard an "ice ball" bouncing around in the wheel pant after our
last landing, so I "hmph'd" and moved on...


Your first problem is that you drive decent cars. If you always drove junk,
you would know that step 1 for _any_ puddle is to stick a finger in it to
see what it is - water, oil, etc. Touch, color, and smell will nearly always
identify the fluid. One rarely has to resort to taste.

...
Strangely, we had changed that O-ring maybe six months ago, and the
pads were fine, then, so we now have a mystery. How did the brake
pads wear completely away so fast? To be safe, we removed the OTHER
wheel pant (more screws, nuts, banged heads) and inspected the left
brakes, and they are fine. Tons of pad left in them.


Disk brakes rely on rotor runout to push the pads back just a bit do you
don't have the pads in constant contact. If the new O ring was a bit on the
tight side, and the piston was sticking (the O ring could have worked like a
spring) then the pad would drag all the time the wheel was turning and wear
out quite quickly.

Your second problem is that you fly too much. Airplanes sitting in the
hanger don't wear out.

...
But we're still wondering what/how this happened, especially since the
ONLY time we lock the brakes to make a turn is at our hangar, and that
would be a hard LEFT turn. We NEVER turn hard right, so why should
that brake wear so quickly?

Hard, brake locked, turns won't wear the inside pads - they are locked. No
movement, no wear.

Anyone know if it's possible for a brake to hang up and not release,
resulting in advanced wear like this?


As noted above.

Or should I keep blaming Mary
for riding the (right) brake?


That is likely to work as well as me denying that I snore at night.

Your third problem is that your wife (like most) is smarter than you and
blaming her generally backfires.

--
Geoff
The Sea Hawk at Wow Way d0t Com
remove spaces and make the obvious substitutions to reply by mail
When immigration is outlawed, only outlaws will immigrate.


 




Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Bad timing... Jay Honeck Piloting 39 March 13th 07 08:19 PM
timing holds [email protected] Instrument Flight Rules 16 February 17th 05 12:18 AM
Approach Timing john smith Instrument Flight Rules 36 September 9th 04 03:37 PM
Timing light for electronic ignition Ron Home Built 4 August 20th 04 05:18 PM
Timing on Subaru EJ22 ??? Randy Rotorcraft 1 November 9th 03 06:15 AM


All times are GMT +1. The time now is 01:46 PM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright ©2004-2025 AviationBanter.
The comments are property of their posters.