A aviation & planes forum. AviationBanter

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Go Back   Home » AviationBanter forum » rec.aviation newsgroups » Home Built
Site Map Home Register Authors List Search Today's Posts Mark Forums Read Web Partners

Engine Questions



 
 
Thread Tools Display Modes
  #1  
Old January 20th 04, 06:09 PM
jls
external usenet poster
 
Posts: n/a
Default


"Marvin Barnard" wrote in message
...
I agree with your choice, and fly VW myself.
If you don't mind a redrive, VW Gene Smith offers an
excellent version for type 1 VW which will turn a big prop and produce
100 hp at 200 lbs. installed. If you build it the cost is aproaching
$3000.00 bucks.
A direct drive (for aircraft like Texas Parasol, Teenie, M-19, or
VP-1 etc.) can be built for 700.00 bucks if you start from a good core.
VW type 1 is the most proven engine in the world considering it's
billions of hours time in ground vehicles and a lot of airtime as well.
No engine design ever built even comes close to the aftermarket
development data, performance data, endurance data, cost economics, and
parts availablility as the type 1 VW. ..........None.


I put around 100 hours on a VW-powered Karatoo with redrive. We never
really got it dialed in but I was impressed with that big prop out there
ticking over and acting like an airbrake on final. And when you shoved the
throttle in, that thing could do some climbing too. The redrive used a
cogged belt which gave some trouble but could have been tweaked out with
time and effort. It was not my project but I enjoyed flying it. One time
I was out over Lake James when the VW engine seized from overheating and
barely made it to dry land. Plenty of power from an EA-81, and then an
1835cc VW. The VW engine always got too hot, but now that I look back on
it, it was because they hadn't cowled and baffled it right and should have
used a bigger oil sump and oil cooler. I had a 3-liter Porsche Targa which
held about 10 or 15 qts. oil and a big cooler up front for cooling it. You
have to educate yourself and look around, be circumspect.

Yeah, I'm sold on those type 1 VW engines --- simple, durable, light, cheap,
fun to rebuild and tinker with and you can run them forever. But if you
turn one up to 3k-3.5k rpm, you're going to have to be especially careful to
cool it. Have you seen the Piet with that huge radiator up front to cool
the Ford engine? If I were building a Piet I'd go with the Ford and be
patriotic about it. Besides, that low-revving guttural engine purr is,
well, indescribably sonorous.


 




Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Homebuilt Aircraft Frequently Asked Questions (FAQ) Ron Wanttaja Home Built 1 January 2nd 04 10:02 PM
Homebuilt Aircraft Frequently Asked Questions (FAQ) Ron Wanttaja Home Built 0 October 2nd 03 04:07 AM
Corky's engine choice Corky Scott Home Built 39 August 8th 03 05:29 AM
Homebuilt Aircraft Frequently Asked Questions (FAQ) Ron Wanttaja Home Built 4 August 7th 03 06:12 AM
Homebuilt Aircraft Frequently-Asked Questions (FAQ) Ron Wanttaja Home Built 0 July 4th 03 05:50 PM


All times are GMT +1. The time now is 07:15 PM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright ©2004-2025 AviationBanter.
The comments are property of their posters.