A aviation & planes forum. AviationBanter

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Go Back   Home » AviationBanter forum » rec.aviation newsgroups » Owning
Site Map Home Register Authors List Search Today's Posts Mark Forums Read Web Partners

auxiliary heat



 
 
Thread Tools Display Modes
  #1  
Old October 19th 04, 05:11 PM
Joe Dubner
external usenet poster
 
Posts: n/a
Default

Do Long-EZs not have *any* heat? Does having the engine behind you
preclude using hot air off the exhaust for cabin heat?


Like any homebuilt, it has whatever heating system the builder opts for
g.

In the Long (and other EZs), this ranges from nothing at all, to a
exhaust heat muff and a long duct forward, to a forward mounted oil
cooler used as a cabin heat exchanger. One local has a 28V/350W quartz
heater.

I had a exhaust heat muff system but found it so ineffective that I
removed it and used the duct for a wiring conduit. On a sunny day, the
solar heat gain is enough to keep me comfortable in sweatshirt and jeans
except for me feet (hence the heated socks) and my stick hand.

When I flew a Piper Apache my feet were always cold too in spite of that
expensive (to operate and to repair) gas-burning heater. Wish I had
known of the electric socks then. As a bonus, I'd probably be a lot
smarter today, not having inhaled so much carbon monoxide :-)

--
Joe
Long-EZ 821RP
Clarkston, WA



On 19-Oct-04 06:36 Jay Honeck wrote:

That's the theory I used when I wired in some Gerbing's electrically
heated socks for my Long-EZ.


Hmm. This is something I'd not considered before, never having seriously
considered a homebuilt plane.

Do Long-EZs not have *any* heat? Does having the engine behind you
preclude using hot air off the exhaust for cabin heat?

 




Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Any metallurgist's on the group, I want to heat treat aluminum? [email protected] Home Built 3 December 11th 04 12:50 PM
Carb heat specs? Rich S. Home Built 2 November 13th 04 05:39 PM
Painting and air cooled motor? CitizenX Home Built 5 June 30th 04 01:47 PM
Inside the Cowling Fire / Heat Detector? George Sconyers Owning 5 May 30th 04 08:04 PM
pitot heat question K. Ari Krupnikov Instrument Flight Rules 7 December 11th 03 02:51 AM


All times are GMT +1. The time now is 11:47 PM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright ©2004-2025 AviationBanter.
The comments are property of their posters.