|
| If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|||||||
|
|
Thread Tools | Display Modes |
|
|
|
#1
August 18th 04, 05:10 PM
|
|||
|
|||
On Wed, 18 Aug 2004 17:57:19 +0200, Thomas Borchert
wrote: Robert, it should read the same pressure as the altimeter in the Kollsmann window when the altimeter is set to zero feet, right? ......altimeter set to ***airfield elevation***, correct?? The old QFE vs QNH settings thing... GNP, Socata TB-9 SX-ADE, LGTG, Greece, (grounded due to Olympics in progress, next flight 29 September) 
|
|
#2
August 19th 04, 08:52 AM
|
|||
|
|||
|
G,
......altimeter set to ***airfield elevation***, correct?? That will make the Kollsmann show the QNH. And, as has been mentioned in this thread, that is not ambient pressure at the field's elevation. Thus, it is NOT what MP will show. -- Thomas Borchert (EDDH)
|
| Thread Tools | |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Special prop to increase manifold pressure | Fly | Owning | 7 | December 2nd 04 07:23 PM |
| Cabin Pressure Altitude | Greg Esres | Piloting | 4 | March 24th 04 08:35 PM |
| Manifold pressure gauge problem | Dave Russell | Aerobatics | 3 | January 29th 04 03:46 AM |
| Wanted clever PA32 engineer's thoughts - Gear extention problem on Piper Lance | [email protected] | Owning | 5 | July 22nd 03 12:35 AM |
| Pressure Differential in heat Exchangers | Bruce A. Frank | Home Built | 4 | July 3rd 03 05:18 AM |
Hybrid Mode
