![]() |
If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
|
#1
|
|||
|
|||
![]()
Ellipse
My original post (and I think I started the replies) had more to do with the fact you came in with your first appearance with multiple post (4 or 5)the one with the coax was probably the most innocent with plenty of merit ( although I still believe for the vast majority of homebuilders it is gross overkill for the money). Go back and read your post on the prop, which has it's own merits I'm sure. The point is you flooded the news group with it and it was written as a "look at this prop go here and get it" post. I believe you meant well but you came on very strong and that's were the objections mainly came from. I'm sure you have a lot of positive input to this group and yes I do read your post! So I hope you'd go back a review and see where we came from. My intention was not to make you feel unwelcome but when I do see multiple posts (more than 2) directing me to a product, I'm skeptical. I hope that everyone can let this thread die and go on. If people want to discus the merits or use of the cable consider starting a new topic on it all over! John |
Thread Tools | |
Display Modes | |
|
|
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
Antenna ground plane and coax grounding | G. Fred McCutchen | Home Built | 2 | August 8th 04 12:27 PM |
Switching radios on 1 antenna | Nicholas J. Hirsch | Home Built | 16 | June 14th 04 01:49 PM |
Tefzel Wire, RG400 Coax, Crimpers, Terminals, etc.. | Stein Bruch | Home Built | 0 | September 20th 03 04:35 AM |
Military helmet, civilian radios - my solution | Dave Hyde | Home Built | 7 | September 16th 03 01:20 AM |
Transponders, Radios and other avionics procurement questions | Corky Scott | Home Built | 5 | July 2nd 03 11:27 PM |