![]() |
If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
|
#1
|
|||
|
|||
![]()
Icebound wrote:
"Roger" is definitely more professional than "Thanks". Now THAT is truly a waste of bandwidth. Any "aviation-communication" text that I have ever read, discourages the use of "thanks" or "thank you" etc... as being totally redundant and useless... There's the text and then there is the reality, a difference that someone who only reads about aviation most likely misses. A small thank you is not redundant and useless, especially if the controller really did do something that made your flying just a bit easier. After all, we are still civilized human beings. For example, when I am approaching my class C airport from the opposite end of the active runway, I will often request a straight-in to the opposite runway (winds depending). A move like this will shave off perhaps ten minutes of vectors and after a long flight, this might mean the difference between a properly emptied bladder and an improperly emptied bladder. ![]() Often times ATC will go out of their way to accommodate this request, including slowing up an aircraft being vectored for an approach to the active runway. Keep in mind that ATC has absolutely no obligation to do this and a "thank you" from me hopefully demonstrates to him/her that his/her efforts were appreciated. Conversely, I have been thanked many times by ATC after doing something that made their work a little easier, such as 360s, S-turns, not complaining when being vectored through the localizer to join on the other side, or going around. I certainly like to hear those words. -- Peter ----== Posted via Newsfeeds.Com - Unlimited-Uncensored-Secure Usenet News==---- http://www.newsfeeds.com The #1 Newsgroup Service in the World! 120,000+ Newsgroups ----= East and West-Coast Server Farms - Total Privacy via Encryption =---- |
#2
|
|||
|
|||
![]() I often listen to the tower at Pease tradeport (and National Guard base) across the bay. Professional pilots regularly thank the tower, and routinely say "G'day" upon departing the Delta airspace. If I am flying through the airspace low and slow for a tour of Great Bay, I call upon leaving the Class D to give my position and altitude and to say "Thank you Pease!" Perhaps things are more formal in Charlie airspace; I don't know. -- all the best, Dan Ford email (put Cubdriver in subject line) Warbird's Forum: www.warbirdforum.com Piper Cub Forum: www.pipercubforum.com the blog: www.danford.net In Search of Lost Time: www.readingproust.com |
#3
|
|||
|
|||
![]() "Cub Driver" wrote in message ... I often listen to the tower at Pease tradeport (and National Guard base) across the bay. Professional pilots regularly thank the tower, and routinely say "G'day" upon departing the Delta airspace. If I am flying through the airspace low and slow for a tour of Great Bay, I call upon leaving the Class D to give my position and altitude and to say "Thank you Pease!" Perhaps things are more formal in Charlie airspace; I don't know. They're not. |
#4
|
|||
|
|||
![]()
Cub Driver wrote:
I often listen to the tower at Pease tradeport (and National Guard base) across the bay. Professional pilots regularly thank the tower, and routinely say "G'day" upon departing the Delta airspace. I noticed the same behaviour consistently at TYS and erratically elsewhere in the eastern U.S.. George Patterson There's plenty of room for all of God's creatures. Right next to the mashed potatoes. |
Thread Tools | |
Display Modes | |
|
|
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
What F-102 units were called up for Viet Nam | Tarver Engineering | Military Aviation | 101 | March 5th 06 03:13 AM |