![]() |
If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
|
#2
|
|||
|
|||
![]()
Waduino a écrit :
How exactly do you add these to SeeYou? I'm running CU3.1, on evaluation for the moment. I thought it was supposed to get the NASA imagery automajically. I've got a Landsat 7 image, BMP, from the deltafox site but don't know how to get it into CMR. Thanks. Wad. Sorry the page had been truncated and instructions were missing. It is now corrected : http://meteo.deltafox.net/landsat.html Instructions for use in SeeYou : 1. Choose and get the satellite picture you want (for instance MODIS Terra at 45°N 001°E), 2. Save it in a subdirectory of your SeeYou directory (for instance 'C:\Program Files\TeamCU\SeeYou3\maps\modis\') with the suggested name ('N4500E00100.jpg'), 3. Open the file 'SeeYou.mds' (C:\Program Files\TeamCU\SeeYou3\SeeYou.mds) in WordPad or any text editor, 4. Add the calibration data above ('C:\Program Files\TeamCU\SeeYou3\maps\modis\N4500E00100.jpg,0. 206824,45.560245,1.792176,44.435455,20,True,,modis N4500E00100') 5. Save SeeYou.mds file 6. Open SeeYou : the picture is available as a raster map 7. THe new file appears in SeeYou, menu Tools, Raster Maps ; modify if necessary the priority of the map ; 8. Load only necessary .jpg files, since too much may slow SeeYou a lot ; if needed convert .jpg files into .cmr (SeeYou, menu Tools, Raster maps) -- Denis R. Parce que ça rompt le cours normal de la conversation !!! Q. Pourquoi ne faut-il pas répondre au-dessus de la question ? |
#3
|
|||
|
|||
![]()
OK, it's working now, but...
- the file is a jpg (I think) but when I go to save it IE only offers to save it as a bmp - once the file was saved, right type, right name, right place, I had to click on "satellite images" map group for it to work. Lucky guess on my part. Is the LandSat imagery updated from time to time? Merci de toute votre aide. J'ai decidé d'achèter le logiciel. Wad. "Denis" wrote in message ... Waduino a écrit : How exactly do you add these to SeeYou? I'm running CU3.1, on evaluation for the moment. I thought it was supposed to get the NASA imagery automajically. I've got a Landsat 7 image, BMP, from the deltafox site but don't know how to get it into CMR. Thanks. Wad. Sorry the page had been truncated and instructions were missing. It is now corrected : http://meteo.deltafox.net/landsat.html Instructions for use in SeeYou : 1. Choose and get the satellite picture you want (for instance MODIS Terra at 45°N 001°E), 2. Save it in a subdirectory of your SeeYou directory (for instance 'C:\Program Files\TeamCU\SeeYou3\maps\modis\') with the suggested name ('N4500E00100.jpg'), 3. Open the file 'SeeYou.mds' (C:\Program Files\TeamCU\SeeYou3\SeeYou.mds) in WordPad or any text editor, 4. Add the calibration data above ('C:\Program Files\TeamCU\SeeYou3\maps\modis\N4500E00100.jpg,0. 206824,45.560245,1.792176,44.435455,20,True,,modis N4500E00100') 5. Save SeeYou.mds file 6. Open SeeYou : the picture is available as a raster map 7. THe new file appears in SeeYou, menu Tools, Raster Maps ; modify if necessary the priority of the map ; 8. Load only necessary .jpg files, since too much may slow SeeYou a lot ; if needed convert .jpg files into .cmr (SeeYou, menu Tools, Raster maps) -- Denis R. Parce que ça rompt le cours normal de la conversation !!! Q. Pourquoi ne faut-il pas répondre au-dessus de la question ? |
#4
|
|||
|
|||
![]()
Waduino a écrit :
OK, it's working now, but... - the file is a jpg (I think) but when I go to save it IE only offers to save it as a bmp bad browser, change browser ;-) try Firefox ! http://www.mozilla.org/ - once the file was saved, right type, right name, right place, I had to click on "satellite images" map group for it to work. Lucky guess on my part. you're right, map groups are a new feature in SeeYou 3 and I did not update this yet... Is the LandSat imagery updated from time to time? No, there are from 1999 to 2003 AFAIK Merci de toute votre aide. De rien ! -- Denis R. Parce que ça rompt le cours normal de la conversation !!! Q. Pourquoi ne faut-il pas répondre au-dessus de la question ? |
#5
|
|||
|
|||
![]()
Waduino a écrit :
How exactly do you add these to SeeYou? I'm running CU3.1, on evaluation for the moment. I thought it was supposed to get the NASA imagery automajically. only the elevation data are downloaded automatically but you can get satellite picture from their site : http://www.seeyou.ws/satellite.php I've got a Landsat 7 image, BMP, from the deltafox site but don't know how to get it into CMR. SeeYou can work with .bmp or .jpg, or do the conversion to .CMR (menu Tools, Raster maps, Convert) -- Denis R. Parce que ça rompt le cours normal de la conversation !!! Q. Pourquoi ne faut-il pas répondre au-dessus de la question ? |
Thread Tools | |
Display Modes | |
|
|