Parts from general sources.

One time I needed a bunch of fittings for the fuel line on the VW engine
in the Nieuport 11 I was building. I drove over to the National Aviation
Parts Association store and showed the guy what I needed.

"What's this on?" he asked"

Thinking quickly, I answered "An off-road vehicle."

"Nice try", he replied, "but wearing your EAA hat is a real giveaway."

- J.O.-



John Ammeter wrote:
Don't you buy your parts from the National Aviation Parts
Association???? AKA "NAPA"??

Ron Wanttaja wrote:

On Thu, 8 Sep 2005 13:47:19 -0500, "Gig 601XL Builder"
wr.giacona@coxDOTnet
wrote:


"abripl" wrote in message
oups.com...

In some instances I have had refusal to sell me parts from general
vendors if I tell them it was for aircraft use. One refused to sell me
a 1000lb digital weigh scale and another mfg refused to sell me a
suspension spring. They don't understand the difference between
certified and experimental aircraft. Now I simply tell them it is for a
home garage built off-road vehicle (really off-road).


DO the places you purchase items from regularly ask you what you are
using them for?



I get asked that on occasion. Back in July, when I was buying
aluminum for the
in-panel mount for my ICOM handheld, I got asked if my purchase was
for an
aircraft. There's a lot more danger if you have a sample
part...either the
hardware guy will look at it quizzically and ask, "Where is that
from," or
experienced counter guys will recognize it. The latter happened when
I took one
of my Goodyear brake pads to the local brake reliner to pick up some raw
material to make my own pads, and when I took my Continental's
generator to the
local electrical shop.

Ron Wanttaja

I always knew you were a slow learner....

Repeat after me six times... I WILL take off my EAA hat before entering
the NAPA store...

John

John Ousterhout wrote:
One time I needed a bunch of fittings for the fuel line on the VW engine
in the Nieuport 11 I was building. I drove over to the National Aviation
Parts Association store and showed the guy what I needed.

"What's this on?" he asked"

Thinking quickly, I answered "An off-road vehicle."

"Nice try", he replied, "but wearing your EAA hat is a real giveaway."

- J.O.-



John Ammeter wrote:

Don't you buy your parts from the National Aviation Parts
Association???? AKA "NAPA"??

Ron Wanttaja wrote:

On Thu, 8 Sep 2005 13:47:19 -0500, "Gig 601XL Builder"
wr.giacona@coxDOTnet
wrote:


"abripl" wrote in message
oups.com...

In some instances I have had refusal to sell me parts from general
vendors if I tell them it was for aircraft use. One refused to sell me
a 1000lb digital weigh scale and another mfg refused to sell me a
suspension spring. They don't understand the difference between
certified and experimental aircraft. Now I simply tell them it is
for a
home garage built off-road vehicle (really off-road).



DO the places you purchase items from regularly ask you what you are
using them for?




I get asked that on occasion. Back in July, when I was buying
aluminum for the
in-panel mount for my ICOM handheld, I got asked if my purchase was
for an
aircraft. There's a lot more danger if you have a sample
part...either the
hardware guy will look at it quizzically and ask, "Where is that
from," or
experienced counter guys will recognize it. The latter happened when
I took one
of my Goodyear brake pads to the local brake reliner to pick up some raw
material to make my own pads, and when I took my Continental's
generator to the
local electrical shop.

Ron Wanttaja

John Ammeter wrote:
Don't you buy your parts from the National Aviation Parts
Association???? AKA "NAPA"??

I actually tried that first, for the brake pads. I figured I'd buy a set of
disk brake pads that had enough area and were the right thickness as the
Goodyears needed. The guy at NAPA looked at me weird, when I asked to look at a
selection of pads, but did ask what it was for.

The best weird look I got was at Lowes Aerospace a couple of years back. My Fly
Baby's fuel tank filler sticks up through the turtledeck forward of the cockpit.
There was a stepped grommet that fit exactly around the neck that not only
trimmed up the hole in the turtledeck metal but kept spilled fuel from entering
the cockpit area through the hole.

Anyway, the grommet was bad and I was looking all over for a replacement. I
finally found it. IIRC, it was called something like a "Spud Grommet." It is
used on toilets.

I don't think the Lowes' guy was that worried I was installing it on an
airplane, but he did look odd when I asked what other colors it came in....

Ron Wanttaja