![]() |
If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
|
#1
|
|||
|
|||
![]() "William Snow" Give some thought to the components of lift, on both wings, and to which direction lift acts. ;-) http://makeashorterlink.com/?B25A35DCC I have. I see no forces presented in this illustration that would change the components of lift on the wings or it's direction that would cause the aircraft to roll back to horizontal. Why would a horizontal wing create "more effective lift" than a banked wing? This thread began in another group and some interesting points were discussed, but I honestly expected a few belly laughs here on the absurdity of this book's explanation. Dallas |
#2
|
|||
|
|||
![]()
I agree completely - it's about the slip created and how dihedral
responds to it. Dallas wrote: "William Snow" Give some thought to the components of lift, on both wings, and to which direction lift acts. ;-) http://makeashorterlink.com/?B25A35DCC I have. I see no forces presented in this illustration that would change the components of lift on the wings or it's direction that would cause the aircraft to roll back to horizontal. Why would a horizontal wing create "more effective lift" than a banked wing? |
#3
|
|||
|
|||
![]() "Dallas" Why would a horizontal wing create "more effective lift" than a banked wing? Let's think of a set of wings with a dihedral angle of 10 degrees up from horizontal, on both wings. Now, think of the shadow the wings would make, if the sun were straight overhead, while the plane is banked at 10 degrees. The wing that is up would make a smaller shadow than if the plane were flying level. The wing that is down would be making the largest shadow that is possible. The size of the shadow is the only size that is important, because the lift that is straight up (towards the sun, in our example) is the only lift that will be important to the plane, as that is what is counteracting the force of gravity. The fact that the down wing's shadow is larger, will make have more effective area than the up wing, and will tend to bring that wing back up. While you are in level flight, the same thing will constantly be at work, automatically trying to keep the plane level. -- Jim in NC |
#4
|
|||
|
|||
![]()
It's a coherent description but I think it's inaccurate. The sum of the
lift vectors is now simply tilted from the vertical aircraft will simply turn. I agree that dihedral will have a stabilizing effect but it's not because more of the wing low wing is parallel to the earth. It's because the a/c slips towards the inside of the turn (controls being neutral). The slip gives the low wing a higher angle of attack, thus more lift and it will tend to right itself. Conversely, a wing with dihedral will tend to bank if the aircraft is yawed with the rudder. Left rudder, right skid, right wing has higher a of a in relation to relative wind and the aircraft banks left. Fold a hersey bar sized piece of paper to simulate such a wing. Then slip and skid it and imagine the a of a on each panel. Morgans wrote: "Dallas" Why would a horizontal wing create "more effective lift" than a banked wing? Let's think of a set of wings with a dihedral angle of 10 degrees up from horizontal, on both wings. Now, think of the shadow the wings would make, if the sun were straight overhead, while the plane is banked at 10 degrees. The wing that is up would make a smaller shadow than if the plane were flying level. The wing that is down would be making the largest shadow that is possible. The size of the shadow is the only size that is important, because the lift that is straight up (towards the sun, in our example) is the only lift that will be important to the plane, as that is what is counteracting the force of gravity. The fact that the down wing's shadow is larger, will make have more effective area than the up wing, and will tend to bring that wing back up. While you are in level flight, the same thing will constantly be at work, automatically trying to keep the plane level. |
#5
|
|||
|
|||
![]()
Take a look at the NASA item in the following threads. It should be apparent
what happens. L1L2 therefore L1 wing rises until L1=L2. I can not believe all of this discussion has ensued. This is a fundamental of aircraft design. "Dallas" wrote in message ink.net... "William Snow" Give some thought to the components of lift, on both wings, and to which direction lift acts. ;-) http://makeashorterlink.com/?B25A35DCC I have. I see no forces presented in this illustration that would change the components of lift on the wings or it's direction that would cause the aircraft to roll back to horizontal. Why would a horizontal wing create "more effective lift" than a banked wing? This thread began in another group and some interesting points were discussed, but I honestly expected a few belly laughs here on the absurdity of this book's explanation. Dallas |
#6
|
|||
|
|||
![]()
On Thu, 16 Mar 2006 at 05:56:35 in message
. net, Dallas wrote: Why would a horizontal wing create "more effective lift" than a banked wing? I suppose the thinking is that the lower wing has more effective span than the upper more raised wing. However that is not wholly convincing, in any case if the only thing that happened was a slight roll and nothing else then the lift would not change. The lift vector would incline however and that would tend to push the aircraft sideways. The lose of truly vertical lift at right angles to the wing would also cause the aircraft to sink and the AoA to increase initially before other things would happen. The initial yaw displacement may be followed by a yaw rate which could be said to increase the speed of the outer wing relative to the inner and increase the roll! That is the possible beginning of a spiral dive! Try this. Consider an aircraft rolled slightly and nothing else. If no control inputs are made then the inclined lift and vertical weight will tend to cause the aircraft to start a side slip as suggested above. If the side slip continues then the lower wing will have a higher angle of attack than the upper. Get a strip of card as a wing put dihedral on it and look at it from various directions. A correcting roll couple is then produced. Other things then come into play as well, like yaw stability. The power of dihedral can be demonstrated with rudder and elevator only controls on a radio controlled model. I know; I used to fly one. With plenty of dihedral apply say left rudder. The skid to the right so produced results in a left roll and a subsequent side slip depending on the yaw stability.. However that effect is likely to be small. Maintain the rudder and pull back on the elevator and a nice turn results. Might be uncomfortable for passengers but if you are controlling from the ground who cares! :-) Quite steep turns are easily possible. Incidentally sweep-back can have the same effect as dihedral and may make a delta too stable in roll. Too stable? Add anhedral or turn down the tips? I have probably missed out several other effects but I just wanted to indicate that all sorts of effects may come into play and it depends on a number of factors which way it all goes. What about Dutch Roll for example? -- David CL Francis |
Thread Tools | |
Display Modes | |
|
|
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
Air Force One Had to Intercept Some Inadvertent Flyers / How? | Rick Umali | Piloting | 29 | February 15th 06 04:40 AM |
terminology questions: turtledeck? cantilever wing? | Ric | Home Built | 2 | September 13th 05 09:39 PM |
Nearly had my life terminated today | Michelle P | Piloting | 11 | September 3rd 05 02:37 AM |
Grob G102 Setup | BDS | Soaring | 11 | August 30th 05 03:42 PM |
Biplane wing dihedral | vincent p. norris | General Aviation | 20 | June 18th 05 02:58 AM |