Baron issues

King KFC 200

In the kfc 200, there is very little circuitry downstream
of the attitude bars other than that in the servos. One
summing amplifier is about it.

So if the bars work correctly, but the controls don't move
absolutely one for one with the bars, it's likely
the servos.

If the controls move in one direction or other
when the bars are neutral-- likely is the servo.

Bill H.

Viperdoc wrote:
King KFC 200

One obviously has to have a prepurchase inspection done.

In a perfect world:

1)The inspection would be by a mechanic that is familiar with the aircraft type.
2)The inspection would be done by the mechanic that is going to maintain the plane on an ongoing basis.
3)The inspection is not done by the mechanic that was maintaining the plane.

If the plane in question is out of your area how do you do 1,2,3?

How is this problem solved?

If you have a remote mechanic do the prepurchase, how do you trust the
care and honesty of someone you will only do business with once and
is far far away?


Paul

I don't think things have gotten so bad that he is selling his Baron and
looking for another.

Jim Burns


wrote in message
...
One obviously has to have a prepurchase inspection done.

In a perfect world:

1)The inspection would be by a mechanic that is familiar with the aircraft
type.
2)The inspection would be done by the mechanic that is going to maintain
the plane on an ongoing basis.
3)The inspection is not done by the mechanic that was maintaining the
plane.

If the plane in question is out of your area how do you do 1,2,3?

How is this problem solved?

If you have a remote mechanic do the prepurchase, how do you trust the
care and honesty of someone you will only do business with once and
is far far away?


Paul

I've had this plane for nearly five years, and am happy with its condition
and performance. It is not new to me, and I had an extensive pre-buy/annual
prior to the purchase.

Short of buying something that burns kerosene (which I can't afford) I'm
sticking with it for a while. I expect stuff to break or need replacement
periodically.

It looks like the roll servo is the culprit- it needs a new motor and drive
transistors, along with a new resistor.

The strobe problem is likely the power supply, which will also need
replacement. The whole thing is likely to be around $2500+.

I don't remember where I read it, but I recall an article that talked about
how the servo motors in our autopilots normally run for such short intervals
and at slow speed that they can "gum up" or the dust that the brushes create
can build up and or the commentator can varnish over. The article suggested
using the heading bug, trim, and or test modes to run the servos at high
speed first one direction and then the other occasionally, say once per
month, to "blow" things out and to scrub the brushes and armature.

YMMV, just something I remember reading.
Jim

"Viperdoc" wrote in message
...
I've had this plane for nearly five years, and am happy with its condition
and performance. It is not new to me, and I had an extensive
pre-buy/annual prior to the purchase.

Short of buying something that burns kerosene (which I can't afford) I'm
sticking with it for a while. I expect stuff to break or need replacement
periodically.

It looks like the roll servo is the culprit- it needs a new motor and
drive transistors, along with a new resistor.

The strobe problem is likely the power supply, which will also need
replacement. The whole thing is likely to be around $2500+.

On Tue, 05 Sep 2006 17:18:43 -0700, wrote:

One obviously has to have a prepurchase inspection done.

In a perfect world:

1)The inspection would be by a mechanic that is familiar with the aircraft type.
2)The inspection would be done by the mechanic that is going to maintain the plane on an ongoing basis.
3)The inspection is not done by the mechanic that was maintaining the plane.

If the plane in question is out of your area how do you do 1,2,3?

How is this problem solved?

You pay your mechanic to travel to the airplane and perform the inspection.

I suppose you could somehow arrange for the aircraft to be flown to your
mechanic's shop.


If you have a remote mechanic do the prepurchase, how do you trust the
care and honesty of someone you will only do business with once and
is far far away?

See Above




Paul

Ron (EPM) (N5843Q, Mooney M20E) (CP, ASEL, ASES, IA)

Ron Rosenfeld wrote:
On Tue, 05 Sep 2006 17:18:43 -0700, wrote:


One obviously has to have a prepurchase inspection done.

In a perfect world:

1)The inspection would be by a mechanic that is familiar with the aircraft type.
2)The inspection would be done by the mechanic that is going to maintain the plane on an ongoing basis.
3)The inspection is not done by the mechanic that was maintaining the plane.

If the plane in question is out of your area how do you do 1,2,3?

How is this problem solved?


You pay your mechanic to travel to the airplane and perform the inspection.

I suppose you could somehow arrange for the aircraft to be flown to your
mechanic's shop.


If you have a remote mechanic do the prepurchase, how do you trust the
care and honesty of someone you will only do business with once and
is far far away?


See Above




Paul


Ron (EPM) (N5843Q, Mooney M20E) (CP, ASEL, ASES, IA)


When I had the prepurchase inspection done on my plane I got an
insurance rider on the plane and the owner approved me to fly it to my
mechanic. The distance was not too far, thank goodness. Worked fine.
Turned the rider into an insurance policy when I bought the plane.

--

Regards, Ross
C-172F 180HP
KSWI

"Ross Richardson" wrote in ...
When I had the prepurchase inspection done on my plane I got
an insurance rider on the plane and the owner approved me to
fly it to my mechanic. The distance was not too far, thank goodness.
Worked fine. Turned the rider into an insurance policy when I
bought the plane.


How did you ASSURE the owner that the plane would come back to his airport
if your A&P report was unfavorable. This seems to be the "fear factor" of
allowing the inspection off site for every owner. I've heard of pi$$ing
contests of "It wasn't like that when I gave you the plane, your mechanic
must have broke it", and such.

Mike Isaksen wrote:
"Ross Richardson" wrote in ...

When I had the prepurchase inspection done on my plane I got
an insurance rider on the plane and the owner approved me to
fly it to my mechanic. The distance was not too far, thank goodness.
Worked fine. Turned the rider into an insurance policy when I
bought the plane.



How did you ASSURE the owner that the plane would come back to his airport
if your A&P report was unfavorable. This seems to be the "fear factor" of
allowing the inspection off site for every owner. I've heard of pi$$ing
contests of "It wasn't like that when I gave you the plane, your mechanic
must have broke it", and such.


I had known the owner for some time and he was also a member of our EAA
chapter. Plus, I am a good and trustworthy person......

--

Regards, Ross
C-172F 180HP
KSWI