A aviation & planes forum. AviationBanter

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Go Back   Home » AviationBanter forum » rec.aviation newsgroups » Home Built
Site Map Home Register Authors List Search Today's Posts Mark Forums Read Web Partners

LSA specs



 
 
Thread Tools Display Modes
  #1  
Old September 23rd 06, 06:21 PM posted to rec.aviation.homebuilt
.Blueskies.
external usenet poster
 
Posts: 249
Default LSA specs

Any flap is considered a high lift device. An LSA can have flaps, but the stall speed clean is what is the determining
factor for the 45 knot (52MPH) limit. Seems that the powers that be do not want to require pilots to operate any but the
most basic flight and engine controls. Even a LSA 'amphib' with wheels on the floats cannot change the configuration
while in flight - the wheels need to be fixed either extended (for land takeoff and landing) or retracted for water
takeoff and 'landing'.


"Kyle Boatright" wrote in message . ..
:
: wrote in message
: ps.com...
: Could someone clarify something for me concerning LSA's. The websites
: that have the detailed LSA aircraft limitations listed say that the
: plane must have a maximum stalling speed of 51 mph at the maximum gross
: takeoff weight WITHOUT the use of high lift devices.
:
: I plugged the numbers for a Sonex into the John Roncz spreadsheets. (
: Max Gross TOW of 1150 lbs, stall of 46 mph ) and it reports that I need
: a wing area of 180 sq. feet. The Sonex only has 98 square feet of
: wing. What am I missing?
:
: Thanks
: Neal
:
: I *think* high lift devices are considered to be Fowler flaps, slats, slots,
: etc. Everything I can find on the internet indicates that conventional
: hinged flaps are allowed on LSA's.
:
: If you look at something with a similar planform, more weight and more wing
: area (an RV-6), you'll find that the CAFE foundation measured a flaps down
: stall speed of 52 mph for an RV-6a, which is an indicator that a Sonex could
: meet the 51 mph regulation.
:
: http://cafefoundation.org/v2/pdf/RV-...inal%20APR.pdf
:
: KB
:
:


  #2  
Old September 23rd 06, 06:44 PM posted to rec.aviation.homebuilt
Paul Tomblin
external usenet poster
 
Posts: 690
Default LSA specs

In a previous article, ".Blueskies." said:
most basic flight and engine controls. Even a LSA 'amphib' with wheels
on the floats cannot change the configuration
while in flight - the wheels need to be fixed either extended (for land
takeoff and landing) or retracted for water
takeoff and 'landing'.


The makers of one flying-boat style LSA (memory says Mermaid or Merlin or
something like that) have gotten a waiver that allows Light Sport pilots
to get special training to operate the gear.

--
Paul Tomblin http://xcski.com/blogs/pt/
I got accused of being humorless last night. I'm considering quoting
Lieutenant Commander Data: "Perhaps the joke was not funny."
-- Alan Rosenthal
 




Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
ICOM A23 Transformer Specs [email protected] General Aviation 10 April 17th 06 01:32 AM
ICOM A23 Transformer Specs [email protected] Piloting 5 April 16th 06 04:23 AM
A380 spec's G. Sylvester Piloting 30 January 21st 05 10:12 AM
A36 Bonanza Specs Anthony Acri Simulators 1 December 4th 04 12:55 PM
Specs for a B24D Liberator John T. Slodyczka Military Aviation 0 November 21st 03 02:18 AM


All times are GMT +1. The time now is 03:38 AM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright ©2004-2025 AviationBanter.
The comments are property of their posters.