![]() |
If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#41
|
|||
|
|||
![]() "Matt Whiting" wrote in message ... John Ousterhout wrote: Rich S. wrote: I've still got most of a box of .44's loaded by Elmer and would hate to shoot them up. Elmer Keith? Is there any other Elmer? :-) Matt Not if you are a shooter, however, Hams refer to their mentors as Elmers. I've done some hunting thru the internet but can't come up with origin of Ham Elmers. Harold KD5SAK |
#42
|
|||
|
|||
![]()
SPOILER ALERT
On 26 Sep 2006 20:01:55 -0700, "Harry K" wrote: Aw, that scene was just unbelievable, full moon or not. Just like the scenes in "Pearl Harbor" where the protaganist fights in the Battle of Britain, the attack on Pearl Harbor, AND the Doolittle Raid on Japan. It's just Hollywood being Hollywood, and there is apparently nothing anyone can do to stop them from doing this sort of thing. Ah, Pearl Harbor. Brings tears to me eyes how bad that movie was. Urrrrp. I am reminded of the old proverb, "I cried because I had no shoes, until I had a man who had no feet." Or to paraphrase a more recent quote: "Sir, I've seen 'Pearl Harbor,' and 'Flyboys' is no 'Pearl Harbor.'" Flyboys doesn't even come CLOSE to the skankiness of PH. I fully intend to get the DVD of Flyboys and watch the movie again...skipping through the worst bits, of course, but there's no way I'm even getting NEAR 'Pearl Harbor.' All right, enough of my whining. What did I *like* about Flyboys? 1. Introductory scenes at the beginning. Thought the movie did very well at introducing the main characters and their varying backgrounds. 2. Most of the acting. Richard's probably a better judge than I, but I thought that young cast did pretty well. 3. The *ages* of the pilots. We tend to forget how young they were. I love the way the producers found some baby-faced actors. 4. Jean Reno. He's always fun to watch. 5. Most of the combat sequences. Very exciting...I may have some nits about how the planes moved, but the CGI was used effectively to allow the action to be both exciting and easily followed. 6. Ground sequences around the airfield. I though it appeared to be a pretty realistic depiction of a WWI combat airfield. I especially liked them showing Rawlins inspecting his own ammunition...a pretty common theme, among the survivors of the WWI air war. 7. Depiction of the Germans. Yes, we had a nice, hissable villain, but he was nicely contrasted by the other major German pilot. 8. Rawlins' internal conflict the "good guy" German... his reluctance to shoot him down after the guy had spared his own life on a previous flight. This was a well-depicted internal conflict, very nicely depicted. 9. The scenes in the pilot's mess, where the (new) Americans can't believe the old hands are ignoring the recent losses. Doing some heavier-duty thinking about the movie made me reflect that I was perhaps wrong in my earlier comment that the control positions of the CGI airplanes weren't matching those of a real aircraft. The main case was one where a Fokker in an established 90-degree bank was showing almost full left rudder. I came to realize that the rudder position was probably accurate *for a rotary-engined* aircraft! The gyroscopic effect of the high pitch rate would probably be driving the nose to the right, hence the depiction of full left rudder. Cool. Ron Wanttaja |
#43
|
|||
|
|||
![]()
Rich,
do you know the specs of that load?? John Rich S. wrote: "John Ousterhout" wrote in message news:2jESg.166718$FQ1.40082@attbi_s71... Rich S. wrote: I've still got most of a box of .44's loaded by Elmer and would hate to shoot them up. Elmer Keith? That's a treasure. - J.O.- I fired a cylinder load at the Desert Gang Bang. Lord almighty! Out of an original Blackhawk, they rapped my knuckles so hard that the .458 was a pleasure to touch off. Rich S. |
#44
|
|||
|
|||
![]()
"John Ammeter" wrote in message
news:trWdnZ1LtM34sYbYnZ2dnUVZ_qmdnZ2d@cablespeedwa .com... Rich, do you know the specs of that load?? John .......... I do not. It has a 240 gr. lead gas-check SWC bullet stoked by ~20 gr. of what appears to be 2400. I seem to remember a chrono reading of 1200 - 1250 fps out of a 7-1/2" bbl. These numbers are dredged out of my fuzzy memory and are not to be trusted. Rich S. |
#45
|
|||
|
|||
![]()
I saw the film on opening day. Liked it. Especially the scenery and
settings. I am building a biplane and this film was a great motivator to continue. One part that I really like was how the hangar areas look so cluttered with parts all over, the mock-up cockpit and repairs. You have to like that poor bas***d who was welding in several scenes at all hours of the day. CGI planes are better than the models on strings from older pictures but I wish they could program some fuzzy logic into the algorithms so the planes moved more realistically. my two cents Ebby "Dave Stadt" wrote in message m... "Richard Riley" wrote in message ... On Mon, 25 Sep 2006 04:12:41 GMT, "Dave Stadt" wrote: "John Ousterhout" wrote in message news:hHGRg.160371$FQ1.68993@attbi_s71... Robert Baslee's company - Airdrome Aeroplanes - makes kits (very good ones IMO) for various WWI aircraft, including Nieuports and Fokkers. http://www.airdromeaeroplanes.com/ Robert was contracted by the movie company to built two - later changed to four - full-scale Nieuport 17 replicas. Robert and his helpers completed and flew the aircraft in only 52 days. After test flights they were shipped to England for filming. The special effects folks "aged" them to add authenticity. These aircraft used VW engines with a propeller reduction. A casting of rotary engine cylinders was used to cover the cowl opening when the aircraft were on the ground. They were radials not rotarys. No, they were rotaries. The Nieuport 17 used the 110 hp LeRhone type J rotary. The prop was fixed to the case, the crank was attached to the airframe. The entire engine spun. http://www.pwam.org/gnomeng.htm I fully understand that the 'real' Nieuport 17 was powered by a rotary but in the movie they were radials not rotaries. You would think that for the ground shots they would have dummied up a rotary so at least the engine looked like it was turning. They didn't. To me this was a major flaw especially for a director who claims to have gone to extremes to assure accuracy. |
#46
|
|||
|
|||
![]()
Ebby wrote:
CGI planes are better than the models on strings from older pictures but I wish they could program some fuzzy logic into the algorithms so the planes moved more realistically. I haven't seen this movie yet, will probably go this weekend, but what I have noticed with CGI planes in movies is that the shots are always 'perfect', I mean, no camera shaking, always good lighting, always correctly framed; which might be one reason why the thing does not look 'real' especially in action scenes, because intuitively we do expect imperfections; I mean even if the flight model is in fact perfect as well. The only tv serie / movie where I have seen a deliberate effort to introduce imperfections in CGI scenes were the sci-fi serie firefly / serenity, and it is pretty effective... --Sylvain |
#47
|
|||
|
|||
![]()
On Wed, 27 Sep 2006 18:35:26 -0700, Ron Wanttaja
wrote: The main case was one where a Fokker in an established 90-degree bank was showing almost full left rudder. Yes, that really bugged me, not only about the German but about the French planes. But like you I decided that the movie-makers probably had worked this out, and that Nieuports actually did require all that rudder input. |
#48
|
|||
|
|||
![]()
On Sat, 30 Sep 2006 18:31:16 -0400, Cubdriver usenet AT danford.net
wrote: On Wed, 27 Sep 2006 18:35:26 -0700, Ron Wanttaja wrote: The main case was one where a Fokker in an established 90-degree bank was showing almost full left rudder. Yes, that really bugged me, not only about the German but about the French planes. But like you I decided that the movie-makers probably had worked this out, and that Nieuports actually did require all that rudder input. Turn, or knife-edge? (Or knife-edge while using up elevator to skid?) Don |
#49
|
|||
|
|||
![]() "Richard Riley" wrote in message ... : Sadly, I don't get to see much on the big screen these days. I do, : however, know all the dialog to every Disney film ever released on : DVD. : : I'll try to break away and see this one before it closes. : That is good! My daughter also plays them over and over, and she recites the dialog as we drive to the store. Life is good, and so is FlyBoys... |
#50
|
|||
|
|||
![]() "Don Tuite" wrote in message ... : On Sat, 30 Sep 2006 18:31:16 -0400, Cubdriver usenet AT danford.net : wrote: : : On Wed, 27 Sep 2006 18:35:26 -0700, Ron Wanttaja : wrote: : : The main case was one : where a Fokker in an established 90-degree bank was showing almost full left : rudder. : : Yes, that really bugged me, not only about the German but about the : French planes. But like you I decided that the movie-makers probably : had worked this out, and that Nieuports actually did require all that : rudder input. : : Turn, or knife-edge? (Or knife-edge while using up elevator to skid?) : : Don Or steering the guns... |
Thread Tools | |
Display Modes | |
|
|
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
UAV's and TFR's along the Mexico boarder | John Doe | Piloting | 145 | March 31st 06 06:58 PM |
I want to build the most EVIL plane EVER !!! | Eliot Coweye | Home Built | 237 | February 13th 06 03:55 AM |
Most reliable homebuilt helicopter? | tom pettit | Home Built | 35 | September 29th 05 02:24 PM |
Homebuilt Aircraft Frequently Asked Questions (FAQ) | Ron Wanttaja | Home Built | 0 | April 5th 04 03:04 PM |
Homebuilt Aircraft Frequently-Asked Questions (FAQ) | Ron Wanttaja | Home Built | 0 | July 4th 03 04:50 PM |