![]() |
If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
|
#1
|
|||
|
|||
![]()
On May 21, 9:46 am, Frank Stutzman wrote:
I have been told that the PS-5C is immune to carb icing which is why the Bonanza is set up the way it is. I'm not sure I can buy. Yes, the PS5-C has no float, but it still has jets and a butterfly valve. The first fuel-injected Bonanza was the J35; earlier carbureted models are somewhat susceptible to induction icing. I say 'somewhat' because the PS-5C is a pressure carburetor which injects the fuel into the throat rather than letting it be drawn in by vacuum; the carb needs less of a pressure drop in the venturi and therefore sees less of a temperature drop than a vacuum carb. This makes it somewhat (that word again!) resistant to icing. I believe that those Bonanzas also heat their intake air downstream of the carburetor (proximity to exhaust pipes, oil sump? -- not sure) and that further reduces the chance of cooling the mixture to the dewpoint. As for those slide-valve carbs, they do have venturis -- you just can't see them because they're made of air! Downstream of an orifice a high-speed airstream first contracts and then expands, even if there's only wide-open space there. This invisible venturi suffers the usual pressure/temperature drop and of course the evaporation of the fuel droplets makes things worse. Not only can these carbs ice up, they're notorious in the motorcycle world for doing so. Early customer fixes involved stove-boxes rigged around the carbs; modern slide-valve carb bike engines have these factory-made. |
Thread Tools | |
Display Modes | |
|
|