A aviation & planes forum. AviationBanter

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Go Back   Home » AviationBanter forum » rec.aviation newsgroups » Owning
Site Map Home Register Authors List Search Today's Posts Mark Forums Read Web Partners

AvTek Pulsar Installation PIREP (or "Why I'm Not an A&P")



 
 
Thread Tools Display Modes
  #1  
Old October 27th 07, 06:10 PM posted to rec.aviation.owning
Blueskies
external usenet poster
 
Posts: 979
Default AvTek Pulsar Installation PIREP (or "Why I'm Not an A&P")


"Dave Butler" wrote in message ...
Viperdoc wrote:
Is it my impression, or do even the simplest appearing jobs take a lot longer than they first appear? Items that are
supposed to be "bolt in" replacements don't fit, screw holes don't line up, etc.


http://en.wikipedia.org/wiki/Hofstadter's_law


Yep, pretty much everything takes twice as long as I expect, even when I expect it to take twice as long as I
expected....


  #2  
Old October 28th 07, 01:39 AM posted to rec.aviation.owning
Jay Honeck
external usenet poster
 
Posts: 3,573
Default AvTek Pulsar Installation PIREP (or "Why I'm Not an A&P")

Yep, pretty much everything takes twice as long as I expect, even when I expect it to take twice as long as I
expected....


You're talking to the guy who has yet to complete his three-year hotel
remodeling plan. We celebrated our fifth anniversary in August...

;-)
--
Jay Honeck
Iowa City, IA
Pathfinder N56993
www.AlexisParkInn.com
"Your Aviation Destination"

  #3  
Old October 29th 07, 01:33 AM posted to rec.aviation.owning
Margy Natalie
external usenet poster
 
Posts: 476
Default AvTek Pulsar Installation PIREP (or "Why I'm Not an A&P")

Jay Honeck wrote:
Yep, pretty much everything takes twice as long as I expect, even when I expect it to take twice as long as I
expected....



You're talking to the guy who has yet to complete his three-year hotel
remodeling plan. We celebrated our fifth anniversary in August...

Ok, many years ago I figured I could remodel the bathroom in the week
between Christmas and New Year's (when I was a teacher and had the week
off). So, the day after Christmas I walk into the bathroom with an air
chisel and remove walls, ceiling, floor. I took it all down to the
studs. Anyone want to guess how long it was before it was finished?

Margy
;-)
--
Jay Honeck
Iowa City, IA
Pathfinder N56993
www.AlexisParkInn.com
"Your Aviation Destination"

  #4  
Old October 29th 07, 05:09 PM posted to rec.aviation.owning
RST Engineering
external usenet poster
 
Posts: 1,147
Default AvTek Pulsar Installation PIREP (or "Why I'm Not an A&P")

If you would give us the year that you started I could probably guess the
year it was done. Plus or minus a year or so.


{;-)

Jim



--
"If you think you can, or think you can't, you're right."
--Henry Ford

"Margy Natalie" wrote in message
m...
Jay Honeck wrote:
Yep, pretty much everything takes twice as long as I expect, even when I
expect it to take twice as long as I
expected....



You're talking to the guy who has yet to complete his three-year hotel
remodeling plan. We celebrated our fifth anniversary in August...

Ok, many years ago I figured I could remodel the bathroom in the week
between Christmas and New Year's (when I was a teacher and had the week
off). So, the day after Christmas I walk into the bathroom with an air
chisel and remove walls, ceiling, floor. I took it all down to the studs.
Anyone want to guess how long it was before it was finished?

Margy
;-)
--
Jay Honeck
Iowa City, IA
Pathfinder N56993
www.AlexisParkInn.com
"Your Aviation Destination"



  #5  
Old November 1st 07, 03:18 AM posted to rec.aviation.owning
Margy Natalie
external usenet poster
 
Posts: 476
Default AvTek Pulsar Installation PIREP (or "Why I'm Not an A&P")

RST Engineering wrote:
If you would give us the year that you started I could probably guess the
year it was done. Plus or minus a year or so.


{;-)

Jim



'98
  #6  
Old November 1st 07, 05:33 AM posted to rec.aviation.owning
Montblack
external usenet poster
 
Posts: 972
Default AvTek Pulsar Installation PIREP (or "Why I'm Not an A&P")

("Margy Natalie" wrote)
If you would give us the year that you started I could probably guess the
year it was done. Plus or minus a year or so.


'98



Down the hill of our freeway exit ramp, 35W(N) & US10(W), is an expansive
new townhouse development. Margene said it took less time for them to build
125 units than it took me to put up the shelves in the garage. In my
defense, they used nail guns!

http://www.airfields-freeman.com/MN/...htm#university
Former University of Minnesota Airport (great nationwide site!)

http://www.airfields-freeman.com/MN/Blaine_MN_01.jpg
Same page - pic of new townhouses sitting atop the old airport


Montblack



  #7  
Old October 29th 07, 06:57 PM posted to rec.aviation.owning
Ray Andraka
external usenet poster
 
Posts: 267
Default AvTek Pulsar Installation PIREP (or "Why I'm Not an A&P")

Margy Natalie wrote:

Anyone want to guess how long it was before it was finished?


Is it finished yet? ;-)

  #8  
Old November 1st 07, 03:18 AM posted to rec.aviation.owning
Margy Natalie
external usenet poster
 
Posts: 476
Default AvTek Pulsar Installation PIREP (or "Why I'm Not an A&P")

Ray Andraka wrote:
Margy Natalie wrote:

Anyone want to guess how long it was before it was finished?



Is it finished yet? ;-)

More or less, but some things are wearing out for the 2nd time :-)
 




Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
The Good, the Bad, the Ugly: AirGizmo PIREP, PS Engineering CD/Intercom woes, XM "service" Jay Honeck Owning 34 December 15th 06 03:02 AM
Old polish aircraft TS-8 "Bies" ("Bogy") - for sale >pk Aviation Marketplace 0 October 16th 06 07:48 AM


All times are GMT +1. The time now is 08:17 AM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright ©2004-2025 AviationBanter.
The comments are property of their posters.