Looking for picture of an engineer hanging outside of a cub orsimilar in flight, old advertising I think.

James Sleeman wrote:
On Feb 5, 4:17*am, Ron Wanttaja wrote:

http://www.aerofiles.com/stin-sm1b.jpg

Thanks but, I don't think it was that one I was thinking of :-/


I know you also don't mean the pilot "Rosie" played by Brian Dennehy in the
film "Never Cry Wolf" but there was a memorable scene in that movie where
the engine of Rosie's plane starts to falter and...

Rosie: Take the stick... Aaaaaaah!
Tyler: What's wrong?
Rosie: Boredom, Tyler. Boredom - that's what's wrong. And how do you beat
boredom, Tyler?... Adventure. Adventure, Tyler.
Tyler: Where are you going, Rosie? Rosie, what are you doing? I can't fly
this thing! What do I do?

....and Rosie has grabbed a tool (a wrench?), opens the door of the plane in
flight and steps onto the wing struts to fix the problem.

Wish I knew what plane he flew in that scene - it was a real patchwork of
ugly repairs.

Jim Logajan wrote in
:

James Sleeman wrote:
On Feb 5, 4:17*am, Ron Wanttaja wrote:

http://www.aerofiles.com/stin-sm1b.jpg

Thanks but, I don't think it was that one I was thinking of :-/


I know you also don't mean the pilot "Rosie" played by Brian Dennehy
in the film "Never Cry Wolf" but there was a memorable scene in that
movie where the engine of Rosie's plane starts to falter and...

Rosie: Take the stick... Aaaaaaah!
Tyler: What's wrong?
Rosie: Boredom, Tyler. Boredom - that's what's wrong. And how do you
beat boredom, Tyler?... Adventure. Adventure, Tyler.
Tyler: Where are you going, Rosie? Rosie, what are you doing? I can't
fly this thing! What do I do?

...and Rosie has grabbed a tool (a wrench?), opens the door of the
plane in flight and steps onto the wing struts to fix the problem.

Wish I knew what plane he flew in that scene - it was a real patchwork
of ugly repairs.



That was Never Cry wolf, wasn't it? I saw it a loooong time ago. I can't
remember but I think it was a Twin Beech.

For an even more gripping real life adventure like that, see if you can
find an account of Kingsfor Smith's second crossing of the Tasmin Sea in
the Southern Cross.. The lost one engine due to a busted prop and were
losing oil out of another. The only thing to do was transfer oil from
oned engine to the other manually by climbing out on the landing gear
struts, ripping open the cowling with a screwdriver, draining the oil
from ( the left, I think) into his leather briefcase, the only vessel
capable of holding oil on board, then climbing out the other side and
pouring it into the running right engine. The guy who did this is one of
the fathers of long distance navigation. Can't remember his first name,
but his last name was Taylor.



Bertie

On Feb 5, 7:01 am, Bertie the Bunyip wrote:

That was Never Cry wolf, wasn't it? I saw it a loooong time ago. I can't
remember but I think it was a Twin Beech.

deHavilland Beaver, IIRC.

For an even more gripping real life adventure like that, see if you can
find an account of Kingsfor Smith's second crossing of the Tasmin Sea in
the Southern Cross.. The lost one engine due to a busted prop and were
losing oil out of another. The only thing to do was transfer oil from
oned engine to the other manually by climbing out on the landing gear
struts, ripping open the cowling with a screwdriver, draining the oil
from ( the left, I think) into his leather briefcase, the only vessel
capable of holding oil on board, then climbing out the other side and
pouring it into the running right engine. The guy who did this is one of
the fathers of long distance navigation. Can't remember his first name,
but his last name was Taylor.

I have that story in an anthology. Great reading. It was a
tri-motor, and just before the flight they'd had one of the engines
all apart. During the flight, one engine quit (the left, I think),
then the right started losing oil. They couldn't maintain altitude on
one, so they dumped the mail overboard and started the oil transfer.
Made it to shore. The only engine that hadn't given any trouble was
the nose engine: the one that had been apart all over the hangar
floor.

Dan

wrote in news:7abc5b0c-a411-498b-820a-
:

On Feb 5, 7:01 am, Bertie the Bunyip wrote:

That was Never Cry wolf, wasn't it? I saw it a loooong time ago. I can't
remember but I think it was a Twin Beech.

deHavilland Beaver, IIRC.

For an even more gripping real life adventure like that, see if you can
find an account of Kingsfor Smith's second crossing of the Tasmin Sea in
the Southern Cross.. The lost one engine due to a busted prop and were
losing oil out of another. The only thing to do was transfer oil from
oned engine to the other manually by climbing out on the landing gear
struts, ripping open the cowling with a screwdriver, draining the oil
from ( the left, I think) into his leather briefcase, the only vessel
capable of holding oil on board, then climbing out the other side and
pouring it into the running right engine. The guy who did this is one of
the fathers of long distance navigation. Can't remember his first name,
but his last name was Taylor.

I have that story in an anthology. Great reading. It was a
tri-motor, and just before the flight they'd had one of the engines
all apart. During the flight, one engine quit (the left, I think),
then the right started losing oil. They couldn't maintain altitude on
one, so they dumped the mail overboard and started the oil transfer.
Made it to shore. The only engine that hadn't given any trouble was
the nose engine: the one that had been apart all over the hangar
floor.


That's the one. You probably read the sae account I did which would have
been Gordon Taylor's account. I remeber him remarking that the guy who had
the nose engine apart he wouldn't let work on his Model T. IIRC, the left
engine itself didn't quit, they shed a prop blade and part of the problem
getting the vibratin from that when it was windmilling.