![]() |
If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
![]()
King KI-209 with MX170B, shows an error of 30 degrees. Is there an
adjustment screw on the indicator or a correction potentiometer on the radio to correct the error? I work weekdays and the avionics shops are open only on weekdays. |
#2
|
|||
|
|||
![]()
On Feb 3, 5:38*am, "PiperFlyer" wrote:
King KI-209 with MX170B, shows an error of 30 degrees. Is there an adjustment screw on the indicator or a correction potentiometer on the radio to correct the error? I work weekdays and the avionics shops are open only on weekdays. There is an adjustment. But: If it's off by 30 degrees, there is something wrong with the unit. The adjustment does not have anywhere near that range. Bill Hale BPPP Instructor Fix radios part time. |
#3
|
|||
|
|||
![]()
Thanks Bill.
How is the adjustment made for minor deviation? Is it on the indicator or the radio? Appreciate your input. PiperFlyer " wrote in message ... On Feb 3, 5:38 am, "PiperFlyer" wrote: King KI-209 with MX170B, shows an error of 30 degrees. Is there an adjustment screw on the indicator or a correction potentiometer on the radio to correct the error? I work weekdays and the avionics shops are open only on weekdays. There is an adjustment. But: If it's off by 30 degrees, there is something wrong with the unit. The adjustment does not have anywhere near that range. Bill Hale BPPP Instructor Fix radios part time. |
#4
|
|||
|
|||
![]()
On Feb 5, 4:09*am, "EK" wrote:
Thanks Bill. How is the adjustment made for minor deviation? Is it on the indicator or the radio? Appreciate your input. " wrote in message ... On Feb 3, 5:38 am, "PiperFlyer" wrote: 209 You remove the upper left mounting screw. Stick a long, flat blade screwdriver in there to access a 1 turn pot about 2 1/2" behind the panel. I think the range is in the neighborhood of ten degrees. Bill Hale King KI-209 with MX170B, shows an error of 30 degrees. Is there an adjustment screw on the indicator or a correction potentiometer on the radio to correct the error? I work weekdays and the avionics shops are open only on weekdays. There is an adjustment. *But: *If it's off by 30 degrees, there is something wrong with the unit. *The adjustment does not have anywhere near that range. Bill Hale BPPP Instructor Fix radios part time. |
#5
|
|||
|
|||
![]()
Thanks for the info. Appreciate it.
" wrote in message ... On Feb 5, 4:09 am, "EK" wrote: Thanks Bill. How is the adjustment made for minor deviation? Is it on the indicator or the radio? Appreciate your input. " wrote in message ... On Feb 3, 5:38 am, "PiperFlyer" wrote: 209 You remove the upper left mounting screw. Stick a long, flat blade screwdriver in there to access a 1 turn pot about 2 1/2" behind the panel. I think the range is in the neighborhood of ten degrees. Bill Hale King KI-209 with MX170B, shows an error of 30 degrees. Is there an adjustment screw on the indicator or a correction potentiometer on the radio to correct the error? I work weekdays and the avionics shops are open only on weekdays. There is an adjustment. But: If it's off by 30 degrees, there is something wrong with the unit. The adjustment does not have anywhere near that range. Bill Hale BPPP Instructor Fix radios part time. |
Thread Tools | |
Display Modes | |
|
|
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
PZL vario zero adjustment. | [email protected] | Soaring | 1 | September 29th 07 03:38 AM |
ARC RT385A CDI Adjustment | facpi | General Aviation | 3 | October 19th 06 11:52 PM |
KI-209 VOR/LOC/GS Indicator adjustment | kontiki | Owning | 13 | April 25th 05 11:35 PM |
Brake adjustment on the 2-33 | GM | Soaring | 11 | April 19th 05 07:05 PM |
Adjustment of Altimeter | Ron | Home Built | 5 | April 5th 04 03:12 AM |