A aviation & planes forum. AviationBanter

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Go Back   Home » AviationBanter forum » rec.aviation newsgroups » Home Built
Site Map Home Register Authors List Search Today's Posts Mark Forums Read Web Partners

Tecumseh Engine Mounting Question



 
 
Thread Tools Display Modes
  #1  
Old October 30th 03, 01:25 PM
Jerry Wass
external usenet poster
 
Posts: n/a
Default

!doctype html public "-//w3c//dtd html 4.0 transitional//en"
html
 
pLarry Smith wrote:
blockquote TYPE=CITE"jlauer" wrote in message
bra ogle.com"news:d8547a52.0310291906.3e503c3a@postin g.google.com/a...
br Wondering if you have someone could provide an answer to an engine
br installation question.  I have a hovercraft that uses a Tecumseh
LEV
br 80-120 5.5 hp engine for the lifting propeller.
br
br The question is weather the engine can be mounted with the
br piston/spark plug facing down (incline is at 22 degress down angle
br from level) without messing up the engine during operation?
br
br I am concerned that the engine might not get enough lubrication tilted
br down at 22 degress during its operation?
br
br Thanks
pAll the Tecumsehs I've seen have positive pressure oil pumps. 
Tilting 22
brdegrees shouldn't be a problem.   They sure do get tilted
in normal service./blockquote
All depends on what he means by 22 deg. down----( from horizontal)---
brRotating the crankcase 22deg from normal would be ok----bur rotating
the
brengine 90deg + 22deg would NOT!!
br /html

 




Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Objective Engine Discussion Rick Maddy Home Built 26 October 14th 03 04:46 AM
Ford V-6 engine work Corky Scott Home Built 19 August 21st 03 12:04 PM
1710 allison v-12 engine WWII p 38 engine Holger Stephan Home Built 9 August 21st 03 08:53 AM
Corky's engine choice Corky Scott Home Built 39 August 8th 03 04:29 AM
Gasflow of VW engine Veeduber Home Built 4 July 14th 03 08:06 AM


All times are GMT +1. The time now is 06:52 PM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright ©2004-2025 AviationBanter.
The comments are property of their posters.