|
| If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|||||||
|
|
Thread Tools | Display Modes |
|
#41
February 28th 04, 10:37 PM
|
|||
|
|||
"Matthew S. Whiting" wrote in message ... Tarver Engineering wrote: "Matthew S. Whiting" wrote in message ... Yes, I'm just a nice guy. :-) You do have that going for you so far. Your ignorance of pitot static systems is typical, however. Yes, it seems to match yours, so I guess two of us makes it qualify as typical. :-) I thought you were disagreeing with me based on ignorance. 
|
|
#42
February 28th 04, 10:50 PM
|
|||
|
|||
|
Tarver Engineering wrote:
"Matthew S. Whiting" wrote in message ... Tarver Engineering wrote: "Matthew S. Whiting" wrote in message ... Yes, I'm just a nice guy. :-) You do have that going for you so far. Your ignorance of pitot static systems is typical, however. Yes, it seems to match yours, so I guess two of us makes it qualify as typical. :-) I thought you were disagreeing with me based on ignorance. I was. I didn't think you'd admit your ignorance though. Bravo! Matt
|
|
#43
February 28th 04, 10:55 PM
|
|||
|
|||
|
"Matthew S. Whiting" wrote in message ... Tarver Engineering wrote: "Matthew S. Whiting" wrote in message ... Tarver Engineering wrote: "Matthew S. Whiting" wrote in message ... Yes, I'm just a nice guy. :-) You do have that going for you so far. Your ignorance of pitot static systems is typical, however. Yes, it seems to match yours, so I guess two of us makes it qualify as typical. :-) I thought you were disagreeing with me based on ignorance. I was. That is what makes you a nice guy.
|
|
#44
February 29th 04, 12:11 AM
|
|||
|
|||
|
JL Grasso wrote:
"Scott M. Kozel" wrote: JL Grasso wrote: "Scott M. Kozel" wrote: JL Grasso wrote: "Tarver Engineering" wrote: The whole point of using a static port is to be able to take the guts out of a pitot tube and produce only pitot pressure, thus increasing the reliability of the system. Bwaaaaahwahwahwahwahwahwahwahwah3wahw! Keyboard! Thank tarver! I've spewed soda on at least a dozen keyboards, from reading Splappy's posts. Same here. I think it's time for a class action suit to recoup some keyboard money! Keyboard! (but primarily Splappy's fault)
|
|
#45
February 29th 04, 12:25 AM
|
|||
|
|||
|
Rich Ahrens wrote in message si.com...
Matthew S. Whiting wrote: JL Grasso wrote: On Thu, 26 Feb 2004 19:25:26 -0800, "Tarver Engineering" wrote: The whole point of using a static port is to be able to take the guts out of a pitot tube and produce only pitot pressure, thus increasing the reliability of the system. Bwaaaaahwahwahwahwahwahwahwahwah3wahw! Jerry Yes, those static ports are pretty unreliable! :-) All those moving parts... keyboard !
|
|
#46
February 29th 04, 12:26 AM
|
|||
|
|||
|
"Tarver Engineering" wrote in message ...
"Gord Beaman" wrote in message ... Can you just imagine how long the tech course must be?... A pitot tube is a fairly delicate instrument. like your sobriety ?
|
|
#47
February 29th 04, 12:26 AM
|
|||
|
|||
|
"Tarver Engineering" wrote in message ...
"Matthew S. Whiting" wrote in message ... No, you have trouble writing things that make sense. What is unreliable about a pitot tube? The heater is likely the least reliable part. Which airplane(s) have pitot ports? I don't think I've seen one. What makes them more reliable? I have no interest. got that bir right!
|
|
#48
February 29th 04, 03:08 AM
|
|||
|
|||
|
(running with scissors)
"Tarver Engineering" wrote in message ... "Gord Beaman" wrote in message ... Can you just imagine how long the tech course must be?... A pitot tube is a fairly delicate instrument. like your sobriety ? More like his grasp of reality. Dan, U.S. Air Force, retired
|
|
#49
February 29th 04, 06:40 AM
|
|||
|
|||
|
"running with scissors" wrote in message om... "Tarver Engineering" wrote in message ... "Gord Beaman" wrote in message ... Can you just imagine how long the tech course must be?... A pitot tube is a fairly delicate instrument. like your sobriety ? And in the next message he shows what a brick brain you are.
|
|
#50
February 29th 04, 06:42 AM
|
|||
|
|||
|
"Gord Beaman" wrote in message ... Rich Ahrens wrote: Matthew S. Whiting wrote: JL Grasso wrote: On Thu, 26 Feb 2004 19:25:26 -0800, "Tarver Engineering" wrote: The whole point of using a static port is to be able to take the guts out of a pitot tube and produce only pitot pressure, thus increasing the reliability of the system. Bwaaaaahwahwahwahwahwahwahwahwah3wahw! Jerry Yes, those static ports are pretty unreliable! :-) All those moving parts... Can you just imagine how long the tech course must be?... -- -Gord. No doubt the "Delicate Complicated Electronics" involved would require a "Senior EE" to supervise/oversee their design for the best interest of all. Ralph Nesbitt Professional FD/CFR/ARFF Type
|
| Thread Tools | |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Fine example of Tarver Engineering release for service | running with scissors | Instrument Flight Rules | 64 | March 3rd 04 06:01 AM |
| Fine example of Tarver Engineering release for service | running with scissors | Instrument Flight Rules | 7 | February 28th 04 06:07 PM |
| To Tarver Engineering | fudog50 | Military Aviation | 2 | January 9th 04 08:15 PM |
| About death threats and other Usenet potpourri :-) | Dudley Henriques | Military Aviation | 4 | December 23rd 03 08:16 AM |
| FS: Aviation History Books | Neil Cournoyer | Military Aviation | 0 | August 26th 03 09:32 PM |
Linear Mode
