LX-Nano to SN-10B

Once you got the nano connected to the ilec, could you make a declaration to the nano from the ilec?

Jenny

On Sunday, September 16, 2012 9:54:09 PM UTC-4, Aviatrix wrote:
Once you got the nano connected to the ilec, could you make a declaration to the nano from the ilec?

By the time I got this working on Saturday, the flying day was getting shorter and shorter, and I just had to get up in the air to see the Nano - SN-10 basic functionality worked. So I didn't have much time to explore all of the other features of the setup.

I am NOT expecting this functionality to work, but have not tested it. I will reply later if it does work. The procedure with the Volkslogger and the SN-10 was to have the task programmed into the SN-10, then reboot the VL.. Once the VL was powering on, it has a short window where it will accept a task from the flight computer. I've never read anything in the nano documents about this functionality in the nano, so I'm not expecting this to work.

I don't have a windows laptop at the field, and the nano configuration program only runs in windows. I suppose, in theory, that I could generate a .cup file with other software on my Mac, and upload it to the nano, but I've never tested this functionality, either. I'm hoping the .cup file that gets generated from SeeYou or other software is the same .cup file format that the nano uses.