|
| If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|||||||
|
|
Thread Tools | Display Modes |
|
|
|
#1
January 9th 15, 05:41 PM
posted to rec.aviation.soaring
|
|||
|
|||
O-ring material for DOT-3 fluid
On Thursday, January 8, 2015 at 12:52:00 PM UTC-8, wrote:
I also anodized my Cleveland 30-9 brake caliper. With mixed success. See my project at https://sites.google.com/site/threeu...-brake/caliper 3U, Nice work! For the pucks, simple to make new ones on a lathe. I know one gentleman who filled the caliper bore pits with JB Weld, then sanded smooth. It worked, at least initially. I moved from that airport so don't know long term efficacy - I imagine little bits of JB Weld would come loose and fowl the works. bumper 
|
| Thread Tools | |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Fluid Power Ohio | nimbus | Soaring | 5 | February 24th 09 11:47 AM |
| Pitts brake fluid | Al MacDonald | Aerobatics | 2 | April 25th 05 03:43 AM |
| BRAKE FLUID | Ventus B | Soaring | 9 | October 17th 04 07:25 PM |
| compass fluid | D.A.L | Soaring | 4 | September 20th 03 03:06 PM |
| Need help with Fluid Mechanics equation | Doug | Home Built | 4 | August 16th 03 03:13 AM |
Hybrid Mode
