FS: Aerox Regulator, Cannula and Mask

Can you email me at Zen1960 at live bot com. I will spring for it. Looking to put on in my KA6CR.

Dale

On Monday, April 4, 2016 at 10:06:58 PM UTC-4, Dale Watkins wrote:
Can you email me at Zen1960 at live bot com. I will spring for it. Looking to put on in my KA6CR.

Dale

public service announcement... this:

http://www.chiefaircraft.com/ao-4110-621.html

so far, appears less likely to fall apart in normal use vs the right angle flow controls

http://wingsandwheels.com/oxygen-equ...flowmeter.html

still being sold at popular soaring supply houses. The right angle jobs seem to last about three wave camps. Mine broke on the ground, others have been less fortunate. The plastic flowmeter housing generally breaks just above the needle valve.

best,
Evan Ludeman / T8

Well, he'll if we are selling used oxygen equipment, I have two older Aerox flow meters, $35 takes both, I could probably throw in one or more of the "oxsaver" cannula. Moved to Moutain high years ago. Contact me privately.

Those cheaply made flow meters are for the birds. I bought medical
grade panel-mount flow meters for my Sinus (experimental) at 2/3 the
cost and they're far superior in materials and quality. If you don't
have panel space to mount one, you could lay it in your lap just like
the other one, though it's a bit more substantial. Here's a link to an
example: https://www.dwyer-inst.com/Product/F...Area/SeriesOMA

On 4/5/2016 4:50 AM, Tango Eight wrote:
On Monday, April 4, 2016 at 10:06:58 PM UTC-4, Dale Watkins wrote:
Can you email me at Zen1960 at live bot com. I will spring for it. Looking to put on in my KA6CR.

Dale
public service announcement... this:

http://www.chiefaircraft.com/ao-4110-621.html

so far, appears less likely to fall apart in normal use vs the right angle flow controls

http://wingsandwheels.com/oxygen-equ...flowmeter.html

still being sold at popular soaring supply houses. The right angle jobs seem to last about three wave camps. Mine broke on the ground, others have been less fortunate. The plastic flowmeter housing generally breaks just above the needle valve.

best,
Evan Ludeman / T8

--
Dan, 5J

On Tuesday, April 5, 2016 at 10:52:19 AM UTC-4, Dan Marotta wrote:
Those cheaply made flow meters are for the birds.* I bought medical
grade panel-mount flow meters for my Sinus (experimental) at 2/3 the
cost and they're far superior in materials and quality.* If you
don't have panel space to mount one, you could lay it in your lap
just like the other one, though it's a bit more substantial.* Here's
a link to an example:* https://www.dwyer-inst.com/Product/F...Area/SeriesOMA

Dan, what flow rate is used for what altitude?

I don't recall exactly. I carried a pulse oximeter to keep tabs on O2
saturation. Take a look at this link:
http://www.c-f-c.com/gaslink/docs/abo4.htm
http://www.c-f-c.com/gaslink/docs/abo4.htm . Using that it appears
that 1 lpm/10,000' is the FAA recommended flow rate. Therefore, 1.8 lpm
at 18,000', but I'm certainly no expert and you'll have to make your own
choices.

Dan

On 4/5/2016 1:04 PM, pgs wrote:
On Tuesday, April 5, 2016 at 10:52:19 AM UTC-4, Dan Marotta wrote:
Those cheaply made flow meters are for the birds. I bought medical
grade panel-mount flow meters for my Sinus (experimental) at 2/3 the
cost and they're far superior in materials and quality. If you
don't have panel space to mount one, you could lay it in your lap
just like the other one, though it's a bit more substantial. Here's
a link to an example: https://www.dwyer-inst.com/Product/F...Area/SeriesOMA

Dan, what flow rate is used for what altitude?

--
Dan, 5J

The listed site says you can use the flow meter with any O2 system. That is wrong and could be dangerous. Do not use with a Mountain High system.

On Tuesday, April 5, 2016 at 3:50:27 AM UTC-7, Tango Eight wrote:
On Monday, April 4, 2016 at 10:06:58 PM UTC-4, Dale Watkins wrote:
Can you email me at Zen1960 at live bot com. I will spring for it. Looking to put on in my KA6CR.

Dale

public service announcement... this:

http://www.chiefaircraft.com/ao-4110-621.html

so far, appears less likely to fall apart in normal use vs the right angle flow controls

http://wingsandwheels.com/oxygen-equ...flowmeter.html

still being sold at popular soaring supply houses. The right angle jobs seem to last about three wave camps. Mine broke on the ground, others have been less fortunate. The plastic flowmeter housing generally breaks just above the needle valve.

best,
Evan Ludeman / T8

public service announcement... this:

http://www.chiefaircraft.com/ao-4110-621.html

so far, appears less likely to fall apart in normal use vs the right angle flow controls

http://wingsandwheels.com/oxygen-equ...flowmeter.html

still being sold at popular soaring supply houses. The right angle jobs seem to last about three wave camps. Mine broke on the ground, others have been less fortunate. The plastic flowmeter housing generally breaks just above the needle valve.

best,
Evan Ludeman / T8

The straight one you are showing appears to be the newer model from Aerox. If so, it is the one that they tested to -50 degrees and is made of a much better material than the second one you showed.

When I had mine broke in half changing over to a mask at 23,000 ft, I was in a world of hurt. I got down ok, and there is a little story to that, but not for now.

I talked to Aerox and told them they about killed me with their cheap product that was supposed to be aviation grade. They responded telling me that the clear one is fine for WARM conditions in a cockpit, but their new thicker one was tested to -50, and a heavier material that would hold up fine in wave conditions.

IF YOU HAVE THE OLD CLEAR ONE, THROW IT AWAY, AND GET THE NEW ONE FROM THE DIFFERENT MATERIAL. Or better yet put in in your freezer, then pull it out and snap it like a twig so you will never be tempted to use it again.

GET THE NEW ONE THAT IS BETTER MATERIAL, LIKE THE FIRST PHOTO.

I was 10 minutes away from an eastern Lennie in my 1-26. Glad I was not higher when it failed.

Kevin Anderson
92

On Wednesday, April 6, 2016 at 10:08:46 AM UTC-4, wrote:
public service announcement... this:

http://www.chiefaircraft.com/ao-4110-621.html

so far, appears less likely to fall apart in normal use vs the right angle flow controls

http://wingsandwheels.com/oxygen-equ...flowmeter.html

still being sold at popular soaring supply houses. The right angle jobs seem to last about three wave camps. Mine broke on the ground, others have been less fortunate. The plastic flowmeter housing generally breaks just above the needle valve.

best,
Evan Ludeman / T8

The straight one you are showing appears to be the newer model from Aerox.. If so, it is the one that they tested to -50 degrees and is made of a much better material than the second one you showed.

When I had mine broke in half changing over to a mask at 23,000 ft, I was in a world of hurt. I got down ok, and there is a little story to that, but not for now.

I talked to Aerox and told them they about killed me with their cheap product that was supposed to be aviation grade. They responded telling me that the clear one is fine for WARM conditions in a cockpit, but their new thicker one was tested to -50, and a heavier material that would hold up fine in wave conditions.

IF YOU HAVE THE OLD CLEAR ONE, THROW IT AWAY, AND GET THE NEW ONE FROM THE DIFFERENT MATERIAL. Or better yet put in in your freezer, then pull it out and snap it like a twig so you will never be tempted to use it again.

GET THE NEW ONE THAT IS BETTER MATERIAL, LIKE THE FIRST PHOTO.

I was 10 minutes away from an eastern Lennie in my 1-26. Glad I was not higher when it failed.

Kevin Anderson
92

It's unfortunate that the Aerox flow meters are now limited to 25K, as they used to have a scale to 30K. The flow meter that Dan advocated appears to be a better choice if planning on exceeding 25K.

On 4/7/2016 7:59 AM, wrote:
It's unfortunate that the Aerox flow meters are now limited to 25K, as
they used to have a scale to 30K. The flow meter that Dan advocated
appears to be a better choice if planning on exceeding 25K.

Be sure to use a mask above 18,000'.

--
Dan, 5J