ILEC SN10 v2.44 released

ILEC SN10/SN10B version 2.44 is now available at:
http://www.nadler.com/sn10/SN10_Resource_Index.html
Details available in README at the above site.

Please note: If you are using FLARM with SN10 and
a PDA, Oudie, TopHat, etc:
make SURE to update your FLARM to version 6.60 available he
https://flarm.com/support/firmware-u...load-firmware/

Enjoy!
Best Regards, Dave

PS: This marks 21 years of continual updates and service ;-)

This marks 21 years of continual updates and service ;-)

Thank you for that! Being a relatively new user of an SN10b (my glider came with one), I had a few incidents where I was sure I killed the instrument. Dave had the correct answers for me within a few minutes after I sent him an email describing what the unit was doing - or not doing.
Dave - please quit hopping out of gliders, will you? ;-)

Uli
'AS'

Thanks for that 21 years Dave. None out there like you!

KS

On Saturday, July 14, 2018 at 4:33:43 PM UTC-4, Dave Nadler wrote:
ILEC SN10/SN10B version 2.44 is now available at:
http://www.nadler.com/sn10/SN10_Resource_Index.html
Details available in README at the above site.

Please note: If you are using FLARM with SN10 and
a PDA, Oudie, TopHat, etc:
make SURE to update your FLARM to version 6.60 available he
https://flarm.com/support/firmware-u...load-firmware/

Enjoy!
Best Regards, Dave

PS: This marks 21 years of continual updates and service ;-)

On Saturday, July 14, 2018 at 9:47:56 PM UTC-4, Karl Striedieck wrote:
Thanks for that 21 years Dave. None out there like you!

KS

Same. I've never actually bought one of Dave's SN10s (sorry...) but he has nevertheless provided advice on a handful of technical problems I've had over the years (e.g., with FLARM).

Then there's his timeless May 1987 safety article that I provided to the participants at R2N last month following up on a safety talk. Indeed, he has an enviable record...and is alive to keep adding to it!!!

Chip Bearden

On Saturday, July 14, 2018 at 6:47:56 PM UTC-7, Karl Striedieck wrote:
Thanks for that 21 years Dave. None out there like you!

KS

On Saturday, July 14, 2018 at 4:33:43 PM UTC-4, Dave Nadler wrote:
ILEC SN10/SN10B version 2.44 is now available at:
http://www.nadler.com/sn10/SN10_Resource_Index.html
Details available in README at the above site.

Please note: If you are using FLARM with SN10 and
a PDA, Oudie, TopHat, etc:
make SURE to update your FLARM to version 6.60 available he
https://flarm.com/support/firmware-u...load-firmware/
Enjoy!
Best Regards, Dave

PS: This marks 21 years of continual updates and service ;-)

Just for a frame of reference, Windows XP was officially supported for 12 years.

https://support.microsoft.com/en-us/...end-of-support

Thanks for staying above ground Dave.
Does v2.44 have the option "no sink tone in climb mode"????
Jim

On Sunday, July 15, 2018 at 12:02:25 AM UTC-4, JS wrote:
Does v2.44 have the option "no sink tone in climb mode"????

The SN10 has the "KS no bad news" option since 2003.
That suppresses the "speed-up" audio signal in cruise.
But if you insist on circling in sink the SN10 still reminds you ;-)