If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
360 Comm
Does anyone have an old 360 Comm they'd let go cheap?
I'd like to get a transistorized one that I could run with a 12VDC wall wart. My hangar is in a row perpendicular to the runway. I'm about in the center. That means I stop what I'm doing about every 10 minutes and go to the end of the row to see what that interesting sounding airplane is. I want to put a receiver in a box with a speaker and know if the plane landing or taking off is my buddy or something interesting. The transmit portion can be dead. Thanks Paul N1431A paul-anton at comcast dot net |
#2
|
|||
|
|||
360 Comm
You would be better off with an scanner that tunes aircraft. Then you
could scan the tower and ground, and atc. I tried what you are doing, but had to run back and forth to change freqs every few minutes...found an old scanner at a yard sale for 5 bucks and set it up in the hanger... Tri-Pacer wrote: Does anyone have an old 360 Comm they'd let go cheap? I'd like to get a transistorized one that I could run with a 12VDC wall wart. My hangar is in a row perpendicular to the runway. I'm about in the center. That means I stop what I'm doing about every 10 minutes and go to the end of the row to see what that interesting sounding airplane is. I want to put a receiver in a box with a speaker and know if the plane landing or taking off is my buddy or something interesting. The transmit portion can be dead. Thanks Paul N1431A paul-anton at comcast dot net |
#3
|
|||
|
|||
360 Comm
I have a CoMM 11 Narco I'd part with for $35.
I'd guess it would need an speaker like a powered computer one since it puts out 1v type audio. Bill Hale Loveland CO Tri-Pacer wrote: Does anyone have an old 360 Comm they'd let go cheap? I'd like to get a transistorized one that I could run with a 12VDC wall wart. My hangar is in a row perpendicular to the runway. I'm about in the center. That means I stop what I'm doing about every 10 minutes and go to the end of the row to see what that interesting sounding airplane is. I want to put a receiver in a box with a speaker and know if the plane landing or taking off is my buddy or something interesting. The transmit portion can be dead. Thanks Paul N1431A paul-anton at comcast dot net |
#4
|
|||
|
|||
360 Comm
Shoot me an address and I'll send a check.
I'm glad you mentioned the amplified speaker idea. Thanks much Paul Anton " wrote in message oups.com... I have a CoMM 11 Narco I'd part with for $35. I'd guess it would need an speaker like a powered computer one since it puts out 1v type audio. Bill Hale Loveland CO Tri-Pacer wrote: Does anyone have an old 360 Comm they'd let go cheap? I'd like to get a transistorized one that I could run with a 12VDC wall wart. My hangar is in a row perpendicular to the runway. I'm about in the center. That means I stop what I'm doing about every 10 minutes and go to the end of the row to see what that interesting sounding airplane is. I want to put a receiver in a box with a speaker and know if the plane landing or taking off is my buddy or something interesting. The transmit portion can be dead. Thanks Paul N1431A paul-anton at comcast dot net |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
King Comm | Tom Cummings | Owning | 2 | September 13th 04 07:01 PM |
Retractable Comm Antenna | Ron Wanttaja | Home Built | 11 | September 6th 04 06:59 PM |
Buying a used COMM | res | Owning | 8 | January 24th 04 04:46 AM |
Lost comm altitude? | Roy Smith | Instrument Flight Rules | 12 | January 11th 04 12:29 AM |
WinPilot ADV comm port setting | Ted Wagner | Soaring | 1 | December 29th 03 05:44 PM |