If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
Wanted used 3 1/8 in Altimeter
|
#2
|
|||
|
|||
Wanted used 3 1/8 in Altimeter
I have one, but you probably won't be interested. It's calibrated in
feet, but each revolution of the dial is 3,000'. Here's a link to a pictu https://www.dropbox.com/s/2s6k2tur44...meter.lnk?dl=0 On 1/8/2017 4:19 AM, wrote: Looking to purchase a used 3 1/8" (80 mm) Altimeter Tim Hanke Adirondack Soaring Saratoga Springs, NY USA 518-693-6949 -- Dan, 5J |
#3
|
|||
|
|||
Wanted used 3 1/8 in Altimeter
Here's a link that actually works:
https://www.dropbox.com/s/qnekoxc26d...meter.jpg?dl=0 On 1/8/2017 10:34 AM, Dan Marotta wrote: I have one, but you probably won't be interested. It's calibrated in feet, but each revolution of the dial is 3,000'. Here's a link to a pictu https://www.dropbox.com/s/2s6k2tur44...meter.lnk?dl=0 On 1/8/2017 4:19 AM, wrote: Looking to purchase a used 3 1/8" (80 mm) Altimeter Tim Hanke Adirondack Soaring Saratoga Springs, NY USA 518-693-6949 -- Dan, 5J |
#4
|
|||
|
|||
Wanted used 3 1/8 in Altimeter
"but each revolution of the dial is 3,000"
That's an altimeter for an optimist. |
#5
|
|||
|
|||
Wanted used 3 1/8 in Altimeter
It was amazing how quickly I got used to it, but it is odd and only the
adventurous should try it. On 1/8/2017 11:02 AM, chuck wrote: "but each revolution of the dial is 3,000" That's an altimeter for an optimist. -- Dan, 5J |
#6
|
|||
|
|||
Wanted used 3 1/8 in Altimeter
Try http://flyaqi.com/pressure.htm
On Sunday, January 8, 2017 at 5:19:19 AM UTC-6, wrote: Looking to purchase a used 3 1/8" (80 mm) Altimeter Tim Hanke |
#7
|
|||
|
|||
Wanted used 3 1/8 in Altimeter
At 11:19 08 January 2017, wrote:
Looking to purchase a used 3 1/8" (80 mm) Altimeter Tim Hanke Adirondack Soaring Saratoga Springs, NY USA 518-693-6949 Tim, Watch eBay: http://www.ebay.com/sch/i.html? _odkw=altimeter&_osacat=0&_from=R40&_trksid=p20455 73.m570 ..l1313.TR3.TRC2.A0.H0.Xaircraft+altimeter.TRS0&_n kw=aircraft+alt imeter&_sacat=0 If it is for a "new" Twin Astir from Germany, the handbook specifies one that is TSO-C10 and 35,000' compliant. Put something else in there, and the Feds may refuse it on the certification checks. Something else is not legal, and could lead to insurance rejection of a claim in case of a later accident... They will pop up for between $100 and $250 depending on age and condition. You can always pick up a cheap non functional one to use as a trade in core if buying an overhauled one should you want t go that route. RO |
#8
|
|||
|
|||
Wanted used 3 1/8 in Altimeter
Michael and Tim, please contact each other about the ASI from the Twin
Cheers |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Winter altimeter exchange wanted | [email protected] | Soaring | 0 | November 6th 14 05:49 PM |
tso altimeter | Phoenixmotoman | Soaring | 24 | December 8th 10 12:55 PM |
WTB: used 57mm Altimeter OR swap for 80mm Altimeter | joesimmers | Soaring | 0 | November 3rd 09 11:59 AM |
Looking for TSO Altimeter | Rob Turk | Home Built | 0 | June 9th 07 03:52 PM |
Altimeter off | kevmor | Instrument Flight Rules | 11 | March 26th 07 12:11 PM |