A aviation & planes forum. AviationBanter

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Go Back   Home » AviationBanter forum » rec.aviation newsgroups » Soaring
Site Map Home Register Authors List Search Today's Posts Mark Forums Read Web Partners

Volkslogger - Memory Clear through command in PC mode?



 
 
Thread Tools Display Modes
  #1  
Old April 12th 11, 07:31 AM posted to rec.aviation.soaring
WaltWX
external usenet poster
 
Posts: 24
Default Volkslogger - Memory Clear through command in PC mode?

Does anyone know if Connectme or any other software connected to a
Volkslogger can clear memory? ... Or does one have to use MEM CLR from
the buttons?

My VL is under a panel and it's a PITA to clear before each flight.

Walt Rogers, WX
  #2  
Old April 12th 11, 07:46 AM posted to rec.aviation.soaring
Basil
external usenet poster
 
Posts: 12
Default Volkslogger - Memory Clear through command in PC mode?

The memory clears fine with a command from Winpilot so it must be
possible.

Basil

On Mon, 11 Apr 2011 23:31:01 -0700 (PDT), WaltWX
wrote:

Does anyone know if Connectme or any other software connected to a
Volkslogger can clear memory? ... Or does one have to use MEM CLR from
the buttons?

My VL is under a panel and it's a PITA to clear before each flight.

Walt Rogers, WX

  #3  
Old April 13th 11, 02:52 AM posted to rec.aviation.soaring
Bob Gibbons[_2_]
external usenet poster
 
Posts: 120
Default Volkslogger - Memory Clear through command in PC mode?


ConnectMe from SeeYou also offers the option to erase the VL flight
log.

Bob

On Tue, 12 Apr 2011 07:46:43 +0100, Basil
wrote:

The memory clears fine with a command from Winpilot so it must be
possible.

Basil

On Mon, 11 Apr 2011 23:31:01 -0700 (PDT), WaltWX
wrote:

Does anyone know if Connectme or any other software connected to a
Volkslogger can clear memory? ... Or does one have to use MEM CLR from
the buttons?

My VL is under a panel and it's a PITA to clear before each flight.

Walt Rogers, WX

  #4  
Old April 13th 11, 06:54 PM posted to rec.aviation.soaring
WaltWX
external usenet poster
 
Posts: 24
Default Volkslogger - Memory Clear through command in PC mode?

I answered my own question...

Connectme DOES clear VL memory after downloading a log and selecting a
check box to delete flight. Tested and it works fine. Now all I have
to do is add a power interrupt switch to my panel in order to put the
VL in PC mode before downloading.

Walt Rogers

 




Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Flying Command Post - Omaha International Airport Touch and Go Practice - Flying Command Plane.jpg (0/1) gt[_3_] Aviation Photos 2 September 1st 07 12:10 PM
How to clear CAI 302 flight log memory? Frank[_1_] Soaring 2 June 19th 07 03:36 AM
How to clear memory in Aero 1530? Stewart Kissel Soaring 2 September 4th 05 06:01 AM
FS2004 upgrade MB and memory or just memory? Don Purcella Simulators 3 September 16th 03 04:37 PM
Volkslogger - Shut off the memory warning buzzer? BJen Soaring 16 July 29th 03 01:12 AM


All times are GMT +1. The time now is 10:33 PM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright ©2004-2025 AviationBanter.
The comments are property of their posters.