A aviation & planes forum. AviationBanter

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Go Back   Home » AviationBanter forum » rec.aviation newsgroups » Home Built
Site Map Home Register Authors List Search Today's Posts Mark Forums Read Web Partners

Tapered Rod Gear Leg Source



 
 
Thread Tools Display Modes
  #1  
Old January 13th 04, 12:22 PM
Dick
external usenet poster
 
Posts: n/a
Default Tapered Rod Gear Leg Source

Would appreciate a source for tapered landing gear legs.

Thanks, Dick


Ads
  #2  
Old January 13th 04, 01:20 PM
Jerry Springer
external usenet poster
 
Posts: n/a
Default

You don't give much info on the style you want but I could give you the name of
the person that makes them for Van's RV series aircraft.

Jerry

Dick wrote:
Would appreciate a source for tapered landing gear legs.

Thanks, Dick



  #3  
Old January 13th 04, 06:52 PM
Bob Kuykendall
external usenet poster
 
Posts: n/a
Default

Earlier, "Dick" wrote:

Would appreciate a source for tapered landing gear legs.


http://www.langair.com/

Bob K.
  #4  
Old January 13th 04, 10:10 PM
Dick
external usenet poster
 
Posts: n/a
Default

Thanks, still in thought stages ,G.
"Bob Kuykendall" wrote in message
om...
Earlier, "Dick" wrote:

Would appreciate a source for tapered landing gear legs.


http://www.langair.com/

Bob K.



 




Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Aluminum vs Fiberglass landing gear - Pro's and cons. Bart Hull Home Built 1 November 24th 03 02:46 PM
Aluminum vs Fiberglass landing gear - Pro's and cons. Bart Hull Home Built 2 November 24th 03 05:23 AM
Aluminum vs Fiberglass landing gear - Pro's and cons. Bart Hull Home Built 0 November 24th 03 03:52 AM
Aluminum vs Fiberglass landing gear - Pro's and cons. Bart D. Hull Home Built 0 November 22nd 03 06:24 AM
Source for copper crush gaskets??? Jim Home Built 2 August 22nd 03 09:44 PM


All times are GMT +1. The time now is 12:54 AM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Copyright 2004-2014 AviationBanter.
The comments are property of their posters.