![]() |
If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
![]()
http://www.clearnav.net/main/cn-vario.html
Evan Ludeman for CNi please see our forum for discussion of all things ClearNav http://www.clearnav.net |
#2
|
|||
|
|||
![]()
At 16:21 12 December 2012, Evan Ludeman wrote:
http://www.clearnav.net/main/cn-vario.html Evan Ludeman for CNi please see our forum for discussion of all things ClearNav http://www.clearnav.net The CN vario ADC includes a three axis magnetometer. How far away from various sources of electromagnetic interference should the ADC be installed to allow for present or future functions requiring the magnetometer? I can't see any reference to this in the manual or tech notes on the website. John Galloway |
#3
|
|||
|
|||
![]()
On Wednesday, December 12, 2012 2:33:45 PM UTC-5, John Galloway wrote:
At 16:21 12 December 2012, Evan Ludeman wrote: http://www.clearnav.net/main/cn-vario.html Evan Ludeman for CNi please see our forum for discussion of all things ClearNav http://www.clearnav.net The CN vario ADC includes a three axis magnetometer. How far away from various sources of electromagnetic interference should the ADC be installed to allow for present or future functions requiring the magnetometer? I can't see any reference to this in the manual or tech notes on the website. John Galloway We have not published any guidelines on this. I expect we will at some future date. Guidelines will probably depend to a certain degree on how fussy we feel is practical and productive for our intended purpose(s). Magnetometers are somewhat notorious for being difficult in glider cockpits, so I doubt very much if we are going to go crazy here. Stay tuned. Evan Ludeman for CNi |
#4
|
|||
|
|||
![]()
On Wednesday, December 12, 2012 2:33:45 PM UTC-5, John Galloway wrote:
... How far away from various sources of electromagnetic interference should the ADC be installed to allow for present or future functions requiring the magnetometer? I can't see any reference to this in the manual or tech notes on the website. 6 feet from the movable magnetized rudder pedals should do it. Of course, I've seen a glider whose compass moved ~ 20 degrees on retracting the landing gear (no kidding) ! Seriously, there are a lot of (not-demagnetized) movable parts in the cockpit... See ya, Dave |
#5
|
|||
|
|||
![]()
On Wednesday, December 12, 2012 5:27:25 PM UTC-5, Dave Nadler wrote:
6 feet from the movable magnetized rudder pedals should do it. Of course, I've seen a glider whose compass moved ~ 20 degrees on retracting the landing gear (no kidding) ! I really like the idea (mentioned in another thread) of mounting your PDA on a Ram mount in front of the (required) compass. |
#6
|
|||
|
|||
![]()
On Dec 12, 11:21*am, Evan Ludeman wrote:
http://www.clearnav.net/main/cn-vario.html Evan Ludeman for CNi please see our forum for discussion of all things ClearNavhttp://www.clearnav.net What a surprise. There are some nice features on the new screens but the speeds and altitudes are already present in the Club vario. Taking away features that you guys already sold is not cool. I did not power up my vario yet but based on the manual on your website when I bought the vario I expected these features to be there. Now if for some reasons I decide NOT to upgrade to XC version I am going to be missing the features I already bought. Another thing that bothers me a little bit that you specified 3 versions at first and now after some people bought into it you say no we will only have 2 versions and buy the way the version that was supposed to cost $1700 in August now costs $2250 since there is no other version, some people may not be very happy about. I am also not certain based on your pricing what it will now cost to upgrade to XC for existing owner of the Display and CNv. |
#7
|
|||
|
|||
![]()
Hi Andrzej,
I understand your points. However, another way to look at it is that you paid either $900 or $1200 for a vario that is now worth $1550. The $1550 price is still a very good price for a speed-to-fly variometer with non-IGC-approved logger. The fee to upgrade it to the top level version is the difference between $1550 and $2250 ($700) which is similar to the upgrade costs talked about all along. If you already own a ClearNav display there are discounts on the upgrade. Best Regards, Paul Remde "Andrzej Kobus" wrote in message ... On Dec 12, 11:21 am, Evan Ludeman wrote: http://www.clearnav.net/main/cn-vario.html Evan Ludeman for CNi please see our forum for discussion of all things ClearNavhttp://www.clearnav.net What a surprise. There are some nice features on the new screens but the speeds and altitudes are already present in the Club vario. Taking away features that you guys already sold is not cool. I did not power up my vario yet but based on the manual on your website when I bought the vario I expected these features to be there. Now if for some reasons I decide NOT to upgrade to XC version I am going to be missing the features I already bought. Another thing that bothers me a little bit that you specified 3 versions at first and now after some people bought into it you say no we will only have 2 versions and buy the way the version that was supposed to cost $1700 in August now costs $2250 since there is no other version, some people may not be very happy about. I am also not certain based on your pricing what it will now cost to upgrade to XC for existing owner of the Display and CNv. |
#8
|
|||
|
|||
![]()
On Wednesday, December 12, 2012 6:05:37 PM UTC-5, Andrzej Kobus wrote:
On Dec 12, 11:21*am, Evan Ludeman wrote: http://www.clearnav.net/main/cn-vario.html Evan Ludeman for CNi please see our forum for discussion of all things ClearNavhttp://www.clearnav.net What a surprise. There are some nice features on the new screens but the speeds and altitudes are already present in the Club vario. Taking away features that you guys already sold is not cool. I did not power up my vario yet but based on the manual on your website when I bought the vario I expected these features to be there. Now if for some reasons I decide NOT to upgrade to XC version I am going to be missing the features I already bought. Another thing that bothers me a little bit that you specified 3 versions at first and now after some people bought into it you say no we will only have 2 versions and buy the way the version that was supposed to cost $1700 in August now costs $2250 since there is no other version, some people may not be very happy about. I am also not certain based on your pricing what it will now cost to upgrade to XC for existing owner of the Display and CNv. Holy moly... Nothing is "going away" that I know of. More likely is a typo or something in need of clarification.... This is the 2013 lineup. 2014 could well be different. You didn't think we were going to put rate gyros and accelerometers on board just to do whizzy cruise/climb switching, did you? We aren't going to be finished with this platform Mar 31, we're really just gettin' started. Evan Ludeman for CNi |
#9
|
|||
|
|||
![]()
On Dec 12, 6:27*pm, "Paul Remde" wrote:
Hi Andrzej, I understand your points. *However, another way to look at it is that you paid either $900 or $1200 for a vario that is now worth $1550. *The $1550 price is still a very good price for a speed-to-fly variometer with non-IGC-approved logger. *The fee to upgrade it to the top level version is the difference between $1550 and $2250 ($700) which is similar to the upgrade costs talked about all along. *If you already own a ClearNav display there are discounts on the upgrade. Best Regards, Paul Remde "Andrzej Kobus" *wrote in message .... On Dec 12, 11:21 am, Evan Ludeman wrote: http://www.clearnav.net/main/cn-vario.html Evan Ludeman for CNi please see our forum for discussion of all things ClearNavhttp://www.clearnav.net What a surprise. There are some nice features on the new screens but the speeds and altitudes are already present in the Club vario. Taking away features that you guys already sold is not cool. I did not power up my vario yet but based on the manual on your website when I bought the vario I expected these features to be there. Now if for some reasons I decide NOT to upgrade to XC version I am going to be missing the features I already bought. Another thing that bothers me a little bit that you specified 3 versions at first and now after some people bought into it you say no we will only have 2 versions and buy the way the version that was supposed to cost $1700 in August now costs $2250 since there is no other version, some people may not be very happy about. I am also not certain based on your pricing what it will now cost to upgrade to XC for existing owner of the Display and CNv. Paul, if this is your point of view I don't want to be your customer. Paul you are trying to tell folks that because price was raised to $1550 and they only paid $1200 they should feel good about loosing features, come on... The point is very simple features were sold that are now being taken away. This is very wrong! Regardless if I upgrade or not this is a terrible business practice and if these features are not back in the Club version I will NEVER buy another instrument from ClearNav. How would you feel if after you applied software fix pack on your computer features disappeared. |
#10
|
|||
|
|||
![]()
On Dec 12, 6:41*pm, Evan Ludeman wrote:
On Wednesday, December 12, 2012 6:05:37 PM UTC-5, Andrzej Kobus wrote: On Dec 12, 11:21*am, Evan Ludeman wrote: http://www.clearnav.net/main/cn-vario.html Evan Ludeman for CNi please see our forum for discussion of all things ClearNavhttp://www.clearnav.net What a surprise. There are some nice features on the new screens but the speeds and altitudes are already present in the Club vario. Taking away features that you guys already sold is not cool. I did not power up my vario yet but based on the manual on your website when I bought the vario I expected these features to be there. Now if for some reasons I decide NOT to upgrade to XC version I am going to be missing the features I already bought. Another thing that bothers me a little bit that you specified 3 versions at first and now after some people bought into it you say no we will only have 2 versions and buy the way the version that was supposed to cost $1700 in August now costs $2250 since there is no other version, some people may not be very happy about. I am also not certain based on your pricing what it will now cost to upgrade to XC for existing owner of the Display and CNv. Holy moly... Nothing is "going away" that I know of. *More likely is a typo or something in need of clarification.... This is the 2013 lineup. *2014 could well be different. *You didn't think we were going to put rate gyros and accelerometers on board just to do whizzy cruise/climb switching, did you? *We aren't going to be finished with this platform Mar 31, we're really just gettin' started. Evan Ludeman for CNi Evan, so why altitudes and speeds are not showing up in Club version but only in XC version. I would suggest someone reviews content before advertising to the world. I am only reacting to the data you guys provided as a producer. I have to believe what I read. So, please tell me what the real story is. |
|
Thread Tools | |
Display Modes | |
|
|
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
ClearNav Variometer Update | Paul Remde | Soaring | 2 | February 16th 12 04:39 AM |
New detailed drawings of ClearNav Variometer | Paul Remde | Soaring | 4 | September 9th 11 06:17 PM |
ClearNav Variometer News | Paul Remde | Soaring | 0 | March 22nd 11 10:12 PM |
ClearNav Instruments Variometer | Paul Remde | Soaring | 0 | December 20th 10 04:45 PM |
ClearNav too big? | brianDG303 | Soaring | 9 | June 13th 08 07:15 PM |