![]() |
If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
![]()
I just completed the ASF's online Runway Incursion presentation, and also
read the information they have about the Wings program at this link: http://flash.aopa.org/asf/runwaySafe...gs_program.cfm After reading it through, it sounds as though I've fulfilled paragraph 7, section h requirements for attendance at a Safety Meeting, and just need the certificate that I printed out when I completed the ASF presentation. In order to fulfill the 1 hour flight requirement for paragraph a, do I just need to go to a flight instructor and request one of the types of training detailed in a(1), a(2), or a(3), and then get an endorsement? And once I've done that, I need to present the endorsement and certificate to the Safety Program Manager at the local FSDO? Just want to be sure how the program works... Also curious if it is possible to just mail the required documentation to the FSDO? -- Guy Elden Jr. |
Thread Tools | |
Display Modes | |
|
|
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
VP-II wings available in Oregon, USA (Or, "How I was coconuted...") | Roberto Waltman | Home Built | 2 | October 29th 04 04:21 PM |
Charging for Wings safety seminar? | Marty Shapiro | Piloting | 19 | June 23rd 04 05:28 PM |
Stolen "Champ" wings located...from 23,000 feet!! | Tom Pappano | Piloting | 17 | December 15th 03 01:24 PM |
Wings from "Champ" stolen in Oklahoma after emergency landing | Tom Pappano | Piloting | 1 | December 7th 03 05:02 AM |
Ford V-6 engine work | Corky Scott | Home Built | 19 | August 21st 03 12:04 PM |