Cracked canopy

Just joined the forum today! I have a LAK-12 with a cracked canopy. Other than going to the factory has anyone (or know of) someone who can make a replacement canopy? I have research this with no luck. This is a great site! Thanks.

On Tuesday, December 30, 2014 5:43:05 PM UTC-8, Sire64 wrote:
Just joined the forum today! I have a LAK-12 with a cracked canopy.
Other than going to the factory has anyone (or know of) someone who can
make a replacement canopy? I have research this with no luck. This is a
great site! Thanks.




--
Sire64

Try Todd's Canopies http://www.toddscanopies.com/

;894068]On Tuesday, December 30, 2014 5:43:05 PM UTC-8, Sire64 wrote:
Just joined the forum today! I have a LAK-12 with a cracked canopy.
Other than going to the factory has anyone (or know of) someone who can
make a replacement canopy? I have research this with no luck. This is a
great site! Thanks.




--
Sire64

Try Todd's Canopies http://www.toddscanopies.com/[/QUOT
Thank you for the reply. I have heard of them and give them a try. Thanks

On Tuesday, December 30, 2014 8:43:05 PM UTC-5, Sire64 wrote:
Just joined the forum today! I have a LAK-12 with a cracked canopy.
Other than going to the factory has anyone (or know of) someone who can
make a replacement canopy? I have research this with no luck. This is a
great site! Thanks.




--
Sire64


the real deal:

http://www.mecaplex.ch/mecaplex.asp?l=en&s=946

Sire64

I don't know if Ray is still making canopies. He did an excellent job on my LS3-a back in the winter of 2010-2011. It was necessary to make a mold from my existing canopy first. I really like the UV Grey color. You could try contacting him.

http://www.thermotecusa.com/

Good luck.

R5

Try Aircraft Windshield in Los Alamitos CA

Aircraftwindshield.com

On Tuesday, December 30, 2014 7:43:05 PM UTC-6, Sire64 wrote:
Just joined the forum today! I have a LAK-12 with a cracked canopy.
Other than going to the factory has anyone (or know of) someone who can
make a replacement canopy? I have research this with no luck. This is a
great site! Thanks.




--
Sire64

If you use ThermotecUSA be prepared for a very "Trying" experience.

Originally Posted by skysailor

On Tuesday, December 30, 2014 7:43:05 PM UTC-6, Sire64 wrote:
Just joined the forum today! I have a LAK-12 with a cracked canopy.
Other than going to the factory has anyone (or know of) someone who can
make a replacement canopy? I have research this with no luck. This is a
great site! Thanks.




--
Sire64

If you use ThermotecUSA be prepared for a very "Trying" experience.

I am not sure if ThermotecUSA is still in business. The last time I talked to him it sounded like he was not interested in making canopies any longer. Thanks for the reply.

On Wednesday, December 31, 2014 11:43:05 PM UTC-8, Sire64 wrote:
Thank you for the reply. I have heard of them and give them a try.
Thanks

Just understand that Todd's does free-blown transparencies, and the tangency match around all the edges might not be what people have come to expect for glider canopies. If you want a good match, send your cracked canopy to Aircraft Windshields and have them make a plug from it and a new canopy from the plug. Then you can use your plug to corner the US market on LAK-12 canopy transparencies.

Thanks, Bob K.

I'll give a nod to Todd's Canopies.
In the 2007 timeframe, his charge was incredibly reasonable for a custom blown, all-he-had-was-a-framerail, canopy with a nice tint.

As far as tangencies; the canopy on my SZD-52-2 is ~72 inches long and extremely flat at the joins to the body. It took Todd two tries he said, but he was happy w/ the result, and I am too.

Shipping was extra, and reasonable for the size of the crate.
You cut the blank out of the stock and trim to install what he sends back in the container. Now... that is a terrible job. It takes a lot of careful work to trim and install a canopy.
~Travis N4067U