Trailer seal replacement

Need to replace the seal that runs along the top of the lower half of my clam shell trailer. Current material is an inch wide and was originally a soft, low-profile material that nestled into the grove in the upper half when the trailer is closed. Any ideas appreciated before I delve into the internet for options.

Is you trailer a product of a recognized manufacturer?

On Wednesday, December 30, 2015 at 5:12:58 PM UTC-6, wrote:
Is you trailer a product of a recognized manufacturer?

No...generic with no noticeable manufacturer. Thanks...Mark

Mark-

I have a source for adhesive backed neoprene seal strip. It comes in 1 inch width with thicknesses from 1/8 inch to 3/4 inch (1/8 inch increments. You might be able to find similar stuff from McMaster-Carr, but if you run into a problem, let me know and I can put you in touch with my supplier.

Email: Mark (at) mmfabrication (dot) com

On Wednesday, December 30, 2015 at 6:55:32 PM UTC-6, Mark628CA wrote:
Mark-

I have a source for adhesive backed neoprene seal strip. It comes in 1 inch width with thicknesses from 1/8 inch to 3/4 inch (1/8 inch increments. You might be able to find similar stuff from McMaster-Carr, but if you run into a problem, let me know and I can put you in touch with my supplier.

Email: Mark (at) mmfabrication (dot) com

Thanks Mark. I appreciate it and have enjoyed the wing wheel you sold me for my ship while out for the OLC camp this year. It is awesome. I was fortunate you had one in stock! Mark