A aviation & planes forum. AviationBanter

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Go Back   Home » AviationBanter forum » rec.aviation newsgroups » Home Built
Site Map Home Register Authors List Search Today's Posts Mark Forums Read Web Partners

O-200 Crankshaft STC for the C85 Continental ---- How's It Going?



 
 
Thread Tools Display Modes
  #1  
Old July 1st 04, 06:18 PM
jls
external usenet poster
 
Posts: n/a
Default O-200 Crankshaft STC for the C85 Continental ---- How's It Going?

We are about to buy a couple of them if the history is good. Anybody know
of any glitches with the modified engine? The STC is $350 and was
originated by Don Swords of Don's Dream Machines in Griffin, GA. You
install an O-200 crankshaft, O-200 rods, and O-200 pistons in a C85, for a
total cost of around 3 grand, not including any other work needed on the
C85, of course.

Some people are using this STC because of the scarcity of C85 crankshafts.
You can buy a new nitrided O-200 crank because Continental is still making
them, although like DeBeers they limit production.


Ads
  #2  
Old July 1st 04, 09:52 PM
Fly
external usenet poster
 
Posts: n/a
Default

Aircraft Specialites Services in Tulsa has sold many!
STC cost is the same, $350 for the papers.
$2450 complete kit. $1995 for new Cont. crankshaft alone.

Years ago, they found a surplus lot of new GPU cranks for which they gained
approval to convert the flange to a certified unit, but that stock has ran
out long ago.

Kent Felkins



" jls" wrote in message
...
We are about to buy a couple of them if the history is good. Anybody

know
of any glitches with the modified engine? The STC is $350 and was
originated by Don Swords of Don's Dream Machines in Griffin, GA. You
install an O-200 crankshaft, O-200 rods, and O-200 pistons in a C85, for a
total cost of around 3 grand, not including any other work needed on the
C85, of course.

Some people are using this STC because of the scarcity of C85 crankshafts.
You can buy a new nitrided O-200 crank because Continental is still making
them, although like DeBeers they limit production.




  #3  
Old September 30th 11, 12:54 PM
Scuddycog Scuddycog is offline
Banned
 
First recorded activity by AviationBanter: Sep 2011
Location: United States
Posts: 2
Send a message via ICQ to Scuddycog
Default

Any person know of any (preferably free) amr converter for Mac to convert from AMR format to friendlier file format.
I may playback the particular amr file using quicktime or perhaps realplayer, but cannot save/export that to any other format. It's a voice saving made on a Nokia mobile phone.
I have tried this amr converter but I want more choice.
Thanks beforehand for any kind of suggestions!.
  #4  
Old September 30th 11, 04:09 PM
Scuddycog Scuddycog is offline
Banned
 
First recorded activity by AviationBanter: Sep 2011
Location: United States
Posts: 2
Send a message via ICQ to Scuddycog
Default

Anyone know of any (if possible free) amr converter for Mac to convert from AMR format to friendlier file format.
I may playback the actual amr file using quicktime or even realplayer, but cannot save/export that to any other format. It's a voice recording made on a Nokia cellular phone.
I have tried this amr converting software but I want more choice.
Thanks ahead of time for any kind of suggestions!.
 




Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Small Continental Oil Press??? Paul Anton Home Built 4 June 15th 04 02:21 AM
Australia only Continental 0-200 or 0-240 Robert Home Built 0 May 20th 04 04:07 AM
Continental Tierra 285 Engine chip Home Built 4 April 30th 04 02:12 AM
Continental 0-200 Robert Home Built 0 April 3rd 04 03:08 AM
0-235 C Crankshaft for sale. LFOD76 Home Built 0 August 11th 03 04:12 AM


All times are GMT +1. The time now is 12:26 AM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Copyright 2004-2014 AviationBanter.
The comments are property of their posters.