![]() |
If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
|
#1
|
|||
|
|||
![]()
Do you own or are you planning to buy or build an aircraft that fits into
the Light Sport Aircraft rules? The airplane can be an older "factory" certified airplane such as the Cub or Ercoupe, a new "factory" S-LSA or an experimental that does or will comply with the LSA rules. http://groups.yahoo.com/group/Sport_...eys?id=1690505 -- Have a good day and stay out of the trees! See ya on Sport Aircraft group http://groups.yahoo.com/group/Sport_Aircraft/ |
#2
|
|||
|
|||
![]() "gilan" wrote Do you own or are you planning to buy or build an aircraft that fits into the Light Sport Aircraft rules? I plan to build, but at this time, I do not know what. I have been seriously considering designing my own, for two reasons. One, I don't see exactly what I want, and two, I find extreme satisfaction at taking a project from beginning to end, on my own. I do have the skills (IMHO) to make an undertaking of this magnitude (with advise, and help) succeed. -- Jim in NC |
#3
|
|||
|
|||
![]()
Morgans wrote:
"gilan" wrote Do you own or are you planning to buy or build an aircraft that fits into the Light Sport Aircraft rules? No, certainly not until the prices get out of the stratosphere and back to something reasonable, like, say, ultralights! (which they are!) David PP-ASEL |
#4
|
|||
|
|||
![]()
If I took this route, it would probably be driven by price, and I don't
think I would build. If I'm going to invest the time to build something, I'd rather build something fast like a Velocity. If I could get a new LSA aircraft for less than $75K, I'd consider a new one, otherwise probably go with an oldie for which parts were still easily available - maybe an ERcoupe so I could learn to do crosswind landings with feet on the floor :-) |
#5
|
|||
|
|||
![]() Paul kgyy wrote: If I took this route, it would probably be driven by price, and I don't think I would build. If I'm going to invest the time to build something, I'd rather build something fast like a Velocity. If I could get a new LSA aircraft for less than $75K, I'd consider a new one, otherwise probably go with an oldie for which parts were still easily available - maybe an ERcoupe so I could learn to do crosswind landings with feet on the floor :-) Paul, You can certainly get a new LSA aircraft for that price. There are several out there in that range. At the moment, I think thare are 3 types that are actually certified, more coming every week or so. Following the conventions of this group, I won't mention the airplane I sell or the prices. If you are interested, email me off the group and I will send you details. Regards, Rick Pellicciotti http://www.lightsportflying.com |
#6
|
|||
|
|||
![]()
("Rick Pellicciotti" wrote)
Following the conventions of this group, I won't mention the airplane I sell or the prices. If you are interested, email me off the group and I will send you details. It's not spam (IMHO) if the post is requested ...it's hangar talk. g Post your plane's link and tell us what's special about it - and don't forget those prices ($$$$$). Many interested people here. Be prepared for some, um, feedback :-) Will it, and you, be at Oshkosh? Montblack |
#7
|
|||
|
|||
![]() "Montblack" wrote in message ... ("Rick Pellicciotti" wrote) Following the conventions of this group, I won't mention the airplane I sell or the prices. If you are interested, email me off the group and I will send you details. It's not spam (IMHO) if the post is requested ...it's hangar talk. g Post your plane's link and tell us what's special about it - and don't forget those prices ($$$$$). Many interested people here. Be prepared for some, um, feedback :-) Uh, I think he did in the original post. ![]() |
#8
|
|||
|
|||
![]()
("Allen" wrote)
Uh, I think he did in the original post. ![]() You are correct. I clicked his sig link the first time around and thought it was just an industry info page - didn't investigate any further. This time I went in: "Our subsidiary, LightSportFlying.com" ---- now I get it. Montblack |
#9
|
|||
|
|||
![]() Montblack wrote: ("Rick Pellicciotti" wrote) Following the conventions of this group, I won't mention the airplane I sell or the prices. If you are interested, email me off the group and I will send you details. It's not spam (IMHO) if the post is requested ...it's hangar talk. g Post your plane's link and tell us what's special about it - and don't forget those prices ($$$$$). Many interested people here. Be prepared for some, um, feedback :-) Will it, and you, be at Oshkosh? Montblack Sorry to take so long to respond to your post. I have been in Romania, at the factory, taking delivery of our first two aircraft. Yes, we will be at Airventure, display #39 and we will also have an airplane in the "Light Sport Aircraft Mall". Our airplane is the "Festival", manufactured by Aerostar S.A. of Romania. Aerostar is the same company that builds the famous Yak52 that I am sure many of you have seen at airshows and aerobatic competitions. Festival is all-metal, and has side-by-side seating for two people. The cockpit is 42" wide. The standard engine is the Rotax 912ULS, 100hp. The airplane has a lot of small features that we think are important to the owner such as locking gas caps and canopy, seats that adjust easily and a large baggage compartment. The airplane has built-in, structural roll-over protection. A lot of airplanes with canopies do not have that. The biggest thing that we have done is that we have worked with Aerostar to "americanize" the airplane. All parts that are subject to wearing out or breaking such as brakes, wheels , tires, instruments and avionics are all of American manufacture and can be sourced readily from the usual places. Aerostar is JAR21 and ISO9000 certified. They do sub-contract work for Boeing and Airbus. They have about 2100 employees. Absolutley great to work with and they build great airplanes. In the course of doing the structural tests as required by the ASTM standards, they actually tested one airframe to destruction. The standard requires 150% load at 4g's. The airplane did 182%. More details on our website at http://www.lightsportflying.com Constructive suggestions are more than welcome. Rick |
#10
|
|||
|
|||
![]() "Rick Pellicciotti" wrote More details on our website at http://www.lightsportflying.com Constructive suggestions are more than welcome. Good looking plane. It should do well. Want a suggestion? Offer it with something other than a Rotax or Jabaru, even if it costs more. I'm just one person, but I won't buy anything with either of those choices. -- Jim in NC |
Thread Tools | |
Display Modes | |
|
|
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
Light Sport Aircraft for Private Pilots (Long) | Jimbob | Owning | 17 | March 1st 05 03:01 AM |
Homebuilt Aircraft Frequently Asked Questions (FAQ) | Ron Wanttaja | Home Built | 0 | October 1st 04 02:31 PM |
Homebuilt Aircraft Frequently Asked Questions List (FAQ) | Ron Wanttaja | Home Built | 0 | September 2nd 04 05:15 AM |
Homebuilt Aircraft Frequently Asked Questions (FAQ) | Ron Wanttaja | Home Built | 4 | August 7th 03 05:12 AM |
Homebuilt Aircraft Frequently-Asked Questions (FAQ) | Ron Wanttaja | Home Built | 0 | July 4th 03 04:50 PM |