![]() |
If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
![]()
Does anyone have any tech specs on a dittel 720c radio?? Square face,button
freq type device. Pin outs and tech spec type stuff appreciated. Joe |
#2
|
|||
|
|||
![]()
Hi Joe
You'll find the Manual he http://www.filser.de/l_manuals.php?a...d=5&language=e Silvan Joseph L. Hyde wrote: Does anyone have any tech specs on a dittel 720c radio?? Square face,button freq type device. Pin outs and tech spec type stuff appreciated. Joe |
#3
|
|||
|
|||
![]()
That would be an "Avionic Dittel" Radio.........Not to be confused with
"Walter Dittel" These radios are however similar to the ATR720 sold in the past by Filser, the pin outs are the same although some interal components are different, the manual with digrams for wiring are available from Filser website http://www.filser-electronic.de/inde...als&language=e ATR720C Manual is in English, ATR720A (like what I think you have) is only German, but both radios also have same wire pin-outs. tim Please visit the Wings & Wheels website at: www.wingsandwheels.com "Joseph L. Hyde" wrote in message .. . Does anyone have any tech specs on a dittel 720c radio?? Square face,button freq type device. Pin outs and tech spec type stuff appreciated. Joe |
Thread Tools | |
Display Modes | |
|
|
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
DITTEL FSG-40 & FSG-12 schematics? | Georg Holderied | Soaring | 5 | August 14th 11 10:48 PM |
FSG 40 720 channel Dittel radio for sale | goneill | Soaring | 1 | July 18th 10 06:59 PM |
Dittel ATR 720B | Tony | Home Built | 0 | January 13th 04 02:31 PM |
Dittel FSG50 wiring diagram | Chris Davison | Soaring | 0 | October 15th 03 07:23 AM |
Changing Dittel Radio Presets | rjciii | Soaring | 3 | August 10th 03 04:57 PM |