503 Rotax corrosion problem

**[email protected]** · October 9th 06, 03:52 AM posted to rec.aviation.homebuilt

Can anyone recommend an aluminum engine corrosion remover/inhibitor or
protectant (preferrably in spray can form) that can be safely "run" on
the Rotax motor? Hoping to not rinse and repeat before each flight.
Looking
for recommendations for storing over the winter that would prevent
further corrosion too. Done so much cleaning lately I'd really hate to
repeat it all.
Sincerely, sore elbows.
Thanks,
Ted Z, Milton, WA.

**[email protected]** · October 9th 06, 12:04 PM posted to rec.aviation.homebuilt

wrote:
Can anyone recommend an aluminum engine corrosion remover/inhibitor or
protectant (preferrably in spray can form) that can be safely "run" on
the Rotax motor? Hoping to not rinse and repeat before each flight.
Looking
for recommendations for storing over the winter that would prevent
further corrosion too. Done so much cleaning lately I'd really hate to
repeat it all.
Sincerely, sore elbows.
Thanks,
Ted Z, Milton, WA.

Spray it generously inside and out with ACF-50 or Boeshield. Then
cover it with a cloth which can breathe. Works for me.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
For Morgans ...Rotax (x 2)	Montblack	Home Built	12	April 28th 06 07:19 AM
Corrosion Evaluation Help	Dick	Home Built	3	July 15th 05 02:51 AM
How much corrosion is too much?	Carl Orton	Owning	5	February 2nd 04 01:31 AM
RF interference issue again (esp. for E Drucker and Jim Weir and other RF wizards)	Snowbird	Home Built	78	December 3rd 03 09:10 PM
RF interference issue again (esp. for E Drucker and Jim Weir and other RF wizards)	Snowbird	Owning	77	December 3rd 03 09:10 PM