Narco Mk 12D display?

Anyone have a source for parts (namely, the display) for a Mk 12D
rather than having the factory do it? They won't sell the part
seperatly.

Jim

jim wrote:

Anyone have a source for parts (namely, the display) for a Mk 12D
rather than having the factory do it? They won't sell the part
seperatly.

Jim

I had mine replaced at "Sky Ranch" (SQI, Whiteside County,
Illinois)about 8 years ago. Cost $200 then. I'm not sure if they are
still in business. No, they won't sell the part. But, if you ship it to
Narco, they will replace it for a couple bucks more than the part price.
Lessee, after 8 years, it should only cost around $900...

Good Luck,
Mike

Looking for parts last night, I came across their website:
http://www.sacskyranch.com/.

Gus

"Mike Spera" wrote in message
ink.net...
jim wrote:

Anyone have a source for parts (namely, the display) for a Mk 12D
rather than having the factory do it? They won't sell the part
seperatly.

Jim

I had mine replaced at "Sky Ranch" (SQI, Whiteside County, Illinois)about
8 years ago. Cost $200 then. I'm not sure if they are still in business.
No, they won't sell the part. But, if you ship it to Narco, they will
replace it for a couple bucks more than the part price. Lessee, after 8
years, it should only cost around $900...

Good Luck,
Mike

Looking for parts last night, I came across their website:
http://www.sacskyranch.com/.

Gus


Completely different place. Mine is (was) in North-Central Illinois.

I believe they are history.
Mike

jim wrote:
Anyone have a source for parts (namely, the display) for a Mk 12D
rather than having the factory do it? They won't sell the part
seperatly.

Jim


I had our display replaced by our Avionics shop a couple of years ago.
Narco shipped the part to him. This was reinforced by the Narco rep I
talked to at AOPA.

Al
1964 Skyhawk
SFF

Al wrote:
jim wrote:
Anyone have a source for parts (namely, the display) for a Mk 12D
rather than having the factory do it? They won't sell the part
seperatly.

Jim


I had our display replaced by our Avionics shop a couple of years ago.
Narco shipped the part to him. This was reinforced by the Narco rep I
talked to at AOPA.

Al
1964 Skyhawk
SFF

Same here. We've had several of these displays replaced, at a parts
cost of well over $300 per unit. We don't buy Narco radios anymore,
having spent much more than the original purchase cost on them to keep
them going.

Dan

I had the display replaced a couple of years ago after a couple of segments
"burnt out". Had to be shipped to Australia with special packaging, due to
the minute radioactive material in the display. Cost about $800 AU.

I now hold my finger of the LCD so the display does not flash brightly when
the unit is turned on.

regards
Ron


wrote in message
ups.com...

Al wrote:
jim wrote:
Anyone have a source for parts (namely, the display) for a Mk 12D
rather than having the factory do it? They won't sell the part
seperatly.

Jim


I had our display replaced by our Avionics shop a couple of years ago.
Narco shipped the part to him. This was reinforced by the Narco rep I
talked to at AOPA.

Al
1964 Skyhawk
SFF

Same here. We've had several of these displays replaced, at a parts
cost of well over $300 per unit. We don't buy Narco radios anymore,
having spent much more than the original purchase cost on them to keep
them going.

Dan

On Tue, 2 Jan 2007 14:12:34 +1100, "Ron"
wrote:

I had the display replaced a couple of years ago after a couple of segments
"burnt out". Had to be shipped to Australia with special packaging, due to
the minute radioactive material in the display. Cost about $800 AU.

I now hold my finger of the LCD so the display does not flash brightly when
the unit is turned on.

regards
Ron


Can you clarify what you mean re. finger. we have just replaced a
display in one of our sets!

In the past the Tx audio failed on 2xCOM and needed a zener diode
replacing. The IDME has had an intermittent DME reading from new on
low frequencies (used by ILS).

Such a shame they are unreliable as they are easy to use and offer
some nice frills.

David

My apologises, I cover the LDR (The intensity control) with my finger to
reduce the initial intensity of the display on power on.

Otherwise a nice set. However it resets the standby frequency to 121.9 MHz
on power on.
--

regards
Ron


wrote in message
...
On Tue, 2 Jan 2007 14:12:34 +1100, "Ron"
wrote:

I had the display replaced a couple of years ago after a couple of
segments
"burnt out". Had to be shipped to Australia with special packaging, due to
the minute radioactive material in the display. Cost about $800 AU.

I now hold my finger of the LCD so the display does not flash brightly
when
the unit is turned on.

regards
Ron


Can you clarify what you mean re. finger. we have just replaced a
display in one of our sets!

In the past the Tx audio failed on 2xCOM and needed a zener diode
replacing. The IDME has had an intermittent DME reading from new on
low frequencies (used by ILS).

Such a shame they are unreliable as they are easy to use and offer
some nice frills.

David

Don't waste your money or time with a narco product, My read-outs went bad a
month after it was off warranty. I spent $700.00 for the repairs. Then the
radio quit working two years later. It was not worth spending anymore
money on it, I pulled it out and threw it in the trash. This radio, Mk12D
had less than 200 hundred hours on it. Never again will I buy a Narco
product, there products are crap. Sincerely.
Clyde Woempner
n19346

"jim" wrote in message
oups.com...
Anyone have a source for parts (namely, the display) for a Mk 12D
rather than having the factory do it? They won't sell the part
seperatly.

Jim