Adhesive Recommendation?

[Steve - KDMW]

One of the rubber pads came off one of my rudder pedals the other day.
Anybody have a good adhesive they can recommend for rubber to metal?

Steve
PA28-151
KDMW

[Mike Noel]

One of the best all-around adhesives I have found is 'Goop'. It seems to
form a tough bond with almost anything.

--
Best Regards,
Mike.

http://flickr.com/photos/mikenoel/

http://photoshow.comcast.net/mikenoel


"Steve - KDMW" > wrote in message
...
> One of the rubber pads came off one of my rudder pedals the other day.
> Anybody have a good adhesive they can recommend for rubber to metal?
>
> Steve
> PA28-151
> KDMW

[Ross]

Mike Noel wrote:
> One of the best all-around adhesives I have found is 'Goop'. It seems to
> form a tough bond with almost anything.
>

Probably a good recommendation. I was going to suggest a contact cement.
Be sure all surfaces are clean and follow the label instructions.

--

Regards, Ross
C-172F 180HP
KSWI

[JGalban via AviationKB.com]

Steve - KDMW wrote:
>One of the rubber pads came off one of my rudder pedals the other day.
>Anybody have a good adhesive they can recommend for rubber to metal?
>

That was a recurring problem for my Cherokee. In the desert heat,
adhesives tended to lose their grip over time. I solved the problem by
using black zip ties to hold the rubber pads on the pedals.

John Galban=====>N4BQ (PA28-180)

--
Message posted via AviationKB.com
http://www.aviationkb.com/Uwe/Forums.aspx/aviation/200810/1

[Marco Leon[_5_]]

"JGalban via AviationKB.com" <u32749@uwe> wrote in message
news:8b51498a7260d@uwe...
> Steve - KDMW wrote:
>>One of the rubber pads came off one of my rudder pedals the other day.
>>Anybody have a good adhesive they can recommend for rubber to metal?
>>
>
> That was a recurring problem for my Cherokee. In the desert heat,
> adhesives tended to lose their grip over time. I solved the problem by
> using black zip ties to hold the rubber pads on the pedals.

I did the same thing to mine in the Warrior. Put them on about 8 years ago
and they're still holding the pads onto the pedal. (Of course now that I
posted this message they'll probably fall off tomorrow!)

Marco

[Jon Woellhaf]

I've had success using 3M auto trim adhesive.

"Steve - KDMW" > wrote in message
...
> One of the rubber pads came off one of my rudder pedals the other day.
> Anybody have a good adhesive they can recommend for rubber to metal?
>
> Steve
> PA28-151
> KDMW

[Lou]

What do they use for golf clubs?
If anything is going to slip it would be
the clubs.