Hello everyone.. I've posted this question in a few different NG's and forums, so appologies in advance for anyone reading it again. Anyow.. I have a Sony Clie TJ25 Palm-OS PDA that I recently purchased an i.trek mouse GPS receiver for from Semsons & Co. in the USA. I'm located in Canada,...

I've got a problem with a cowl flap cable in our Aztec. The other day when landing, I opened the cowl flaps to 1/2 on final, then full open after landing. I noticed when going from 1/2 open to full open while on the ground the left cable seemed stiff. I tried closing the flap, then reopening and...

Hello - Our Symtec pan heater has bit the big one, and we need a replacement. Unfortunately, the model we have is prior to them implementing the feature where you can detach a replaceable element from the mounting plate. And the mounting plate is secured to the block with some thermally...

I imagine circumstances dictate this to some degree, but if your A&P does some work for you, do you tip him? Percentage? - Mike

Couple of months's ago I bought a used strut from an indivudual. My A&P sandblasted it, inspected it, declared it OK. That's the same process the strut would have gone thru if I had purchased it with a "yellow tag", correct? - Mike

Hey all. I'd like to add a 12v power port to hook up my cell charger/PDA/GPS / hairdryer and marguerita blender. Any advice on how to get this done, or is it a shop item? The plane is a 1982 C152. Thanks in advance, Marty from Drizzling Palm Beach

I received a notice in the mail. It says, "If your Lycoming engine has a diaphragm-type fuel pump with Lycoming P/N LW-15473 installed, and has a date code of 3201, the pump must be replaced PRIOR TO NEXT FLIGHT." The defective pumps were shipped from Lycoming between 10/1/01 and 2/2/04. It...

Looks like I may be in for a transfer to St Petersburg, Florida. I am almost afraid to ask, but can a fellow find an affordable hanger within an hours drive? Mike Z

This is not a scam PLEASE read the whole thing, u won't be disappointed. I'd been looking for ways to raise money .I found text similar to this posted in another group and thought I'd try it. When I read this I was very skeptical, but desperate-- I invested six $1.00 bills and six 37 cent postage...

Just a shot in the dark..... I'm in the process of overhauling the O-320-E2C (150 hp) in my '68 Musketeer Sport, model 19A, s/n MB-318. There is an STC available from Lycon to install pistons in the O-32-E2C to increase output to 160 hp. This has been done many times in the past on these...

Well, my airplane got a quick annual this year. I brought N56713 to the aeroclub hangar Friday at ~5pm after flying it around the pattern to get it warm. One A&P and I worked on it until 10pm. Saturday, I worked with the A&P and IA from 8am until 5:30pm to finish it up. Only problems were...

Looking to buy a Cessna 150/150 STOL. Lower 48 states only

Would anyone know of a newsgroup about the russian Yak 18-T?

Flyers, I just wanted to put up post that I am selling my Sporty's DVD collection of Richard Collin's Air Facts on Ebay. I am selling all 8 DVD's that includes the 30 titles. There are two DVD's that have very good IFR information: IFR Risk Management and Instrument Flying Tips. I bought them a...

I bought a cheap SLA trickle charger at a ham fest awhile ago thinking I might use it with a cable I made for my Aztec. On a warm (but not warm enough) day last week I tried start the plane without heating the engines. I failed. I thought it would be a good time to try the charger. I knew my...

Where is all this user fee flak coming from? Do the fuel taxes not get routed back to the system? If not, let's raise a big stink. Are the budgets not big enough? Okay, I might be convinced that this is true, and I may even be willing to look past the fact that the system is where it is due to...

Join and register this for f*cking $0 COST! http://quantumgold.com/default.php?id=14715

While tinkering with the MX300 Nav/Comm I somehow turned the VOR "OFF" and cannot figure out how to get it back ON. I don't have a manual for it. I would greatly appreciate if someone can share the manual with me (scan and e-mail or fax it to me). Thanks. ....Robbie.

Please read this. This is what's killing GA and we ought to do something about it. http://www.cdapress.com/articles/2005/02/08/news/news04.prt and this http://www.news4jax.com/news/4269212/detail.html#

Does anyone have any experience with Electric DG. How do they compare to the Vacuum based ? Thanks. ....Robbie.