I am considering KLN-90B as replacement for my M-3 Approach. Question for experienced KLN-90B users: Legality aside, can you operate KLN-90B in approach mode (doing GPS approaches) with an outdated database? Thanks in advance, Robin Hou

My Cessna 182Q -- wet wing tanks, no bladders -- has developed a fuel seep from the left tank. Can anyone here recommend a good repair shop within a few hours of Denver, Colorado? Thanks! Jon

http://www.youtube.com/watch?v=k4Ccc0lWMis First crack at this. Comments most welcomed here or on the video to improving these type of videos. Still want to work on the sound levels to simulate the actual sound levels. Engine level a touch lower then in the actual plane. Minor balancing act

Hey all. I posted a week or so ago about low power in my Cherokee, but the signal-to-noise ratio was low with all the things we've tried in the past. We're basically at the point of asking if mismatched hydraulic lifters could cause chronic low power. The overhaul was done before we bought the...

Can anyone refer a good paint shop in the CA, NV or AZ area that will deliver a good prep/paint job for under 7K? -jeff

Let me make apologies early...this is just some footage from a quick flight my wife and I took to Bennington, VT last week. It's not refined and was shot impromto with little to no forethought. For what it's worth. http://www.youtube.com/watch?v=7kfglGM8BaI Gene

Yesterday's VFR round robin trip to KRNV Cleveland MS, KJAN Jackson MS and KMBO full stops at each airport. http://www.youtube.com/watch?v=3ibUcF5MUrk Severe clear and rock solid glass smooth air. So smooth, one would have thought the DG video'd during the climb was broke.:-) Quite fascinating...

On Fri, 10 Oct 2008 00:30:26 GMT, Mike wrote: "Gezellig" wrote in message ... On Wed, 08 Oct 2008 23:07:20 GMT, Mike wrote: So is everyone who flies VFR over the top or on a *moonless* night. Are all ...

I'm looking for a piece of used fabric. As strange as this may sound, I want to study it. If anyone has a piece from 14"x14" to 16x16 (or there abouts) could you contact me? I'm curious about how this stuff works. Lou

Who does IFR/VFR certifications in Connecticut? Whats the going price for both IFR and VFR? Thanks Dave

Yesterday's instrument approach workout and it was a mental workout! http://www.youtube.com/watch?v=RChXbsb-gUc ILS approaches over at HKS Hawkins Jackson MS and VOR Alpha back to Madison. True workout which I only made it on top of the overcast for a blissful 30 seconds and the entire flight...

Recently a 72 yo went blind in flight (stroke?) and safely landed in the drink in FL. Several comments were that age should be considered in keeping your PPL. I can see this makes sense /but/ it would prolly be illegal. Too old? If so, at what age do you place the cutoff?

Aviation GPS Makes Flight Experiences More Enjoyable... http://gadgetreviews.co.cc/Aviation_GPS_Makes_Flight_Experiences_More_Enjoyable.htm

One of the rubber pads came off one of my rudder pedals the other day. Anybody have a good adhesive they can recommend for rubber to metal? Steve PA28-151 KDMW

Hi all. I am a partner in ZS-IXL and I am looking for a set of elevators for my Grumman AA-5 Traveler, ZS-IXL. Any help would be greatly appreciated. Below is some useful information on ZS-IXL: 1971 Grumman AA5 Traveller

Hi Everyone, As you may already know, PilotOutlook.com is a comprehensive resource for pilots, aviation industry professionals and enthusiasts. PilotOutlook.com provides a wealth of information about pilot training as well as offering flight planning tools, online log book, pilot store and a...

Hey all. As some of you may recall, about a year ago I posted a question regarding two different power loss issues I was having with my PA-28-140 with an O-360-A4A 180hp upgraded engine. I'll summarize what's transpired and figure to get some opinions on what I might try next. Basically, I...

A member of our EAA chapter has a cylinder from a Franklin 150 engine (off the engine.) The piston was pushed too far up and the top ring sprung out so it now overlaps the cylinder sleeve which locks the piston in place. Does anyone have a technique to get the piston out? Preferably while...

Download Free Softwares At Softcrazy, Largest collection of software avaliable on internet, Antivius , Browsers, Business & Accounting, Music, Websites, Newsreaders , Multimedia , Audio and Video Software and Much More...... http://www.softcrazy.com

My local mechanic says that I need to overhaul my engine. It's got 1200 hours but it's been 27 years since the last overhaul. He's worried about the age, and he hears "piston slap" when he runs the engine. Compression and oil analysis are fine. He is well respected around the local airport. He...