Ventus 2Cxt panel help

Hallo,

I'm working on my panel redesign. It's a "long distance project" with me
on one continent and the glider on another...
Would someone with a "winter access" to his glider take some
measurements for me?

- what is the exterior dimension of Ilec engine controller? I know it is
57mm hole but would need the number for spacing to surrounding instruments

- the support alu tubes that hold bottom of the panel - those attach
perpendicular to panel's face, question is how far back they stay that
way? I need to place LX9000 as far down the panel as possible,
practically "on" those tubes, but don't want to overdo with the
instrument having it's depth...I don't want to run out of space say 50mm
from the panel towards the nose. (while you are there what is the exact
diameter of those tubes?).

Thank you all,

Andy

On Dec 6, 3:35*pm, Andy wrote:
Hallo,

I'm working on my panel redesign. It's a "long distance project" with me
on one continent and the glider on another...
Would someone with a "winter access" to his glider take some
measurements for me?

- what is the exterior dimension of Ilec engine controller? I know it is
57mm hole but would need the number for spacing to surrounding instruments

- the support alu tubes that hold bottom of the panel - those attach
perpendicular to panel's face, question is how far back they stay that
way? I need to place LX9000 as far down the panel as possible,
practically "on" those tubes, but don't want to overdo with the
instrument having it's depth...I don't want to run out of space say 50mm
from the panel towards the nose. (while you are there what is the exact
diameter of those tubes?).

Thank you all,

Andy

Hi Andy

check here

http://www.mandhsoaring.com/panellayouts.html

Yes, I know the standard designs.
Since it is not a standard (yet :-)....

A.



On 12/6/2010 10:47, Mottley wrote:
On Dec 6, 3:35 pm, wrote:
Hallo,

I'm working on my panel redesign. It's a "long distance project" with me
on one continent and the glider on another...
Would someone with a "winter access" to his glider take some
measurements for me?

- what is the exterior dimension of Ilec engine controller? I know it is
57mm hole but would need the number for spacing to surrounding instruments

- the support alu tubes that hold bottom of the panel - those attach
perpendicular to panel's face, question is how far back they stay that
way? I need to place LX9000 as far down the panel as possible,
practically "on" those tubes, but don't want to overdo with the
instrument having it's depth...I don't want to run out of space say 50mm
from the panel towards the nose. (while you are there what is the exact
diameter of those tubes?).

Thank you all,

Andy

Hi Andy

check here

http://www.mandhsoaring.com/panellayouts.html