![]() |
If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
![]()
What are the FAA regulations regarding installing a communications
radio in a certified glider. I have had many opinions expressed and would appreciate any definitive answers with references to the appropriate regulations. |
#2
|
|||
|
|||
![]()
On Mar 21, 7:12*pm, sky wrote:
What are the FAA regulations regarding installing a communications radio in a certified glider. *I have had many opinions expressed and would appreciate any definitive answers with references to the appropriate regulations. Part 43 requires an A&P to at a minimum sign off the installation, maybe do a 337. I believe there is no actual requirement to have a TSO radio. However your A&P/avionics shop may disagree. They may require the radio be TSO'ed to feel comfortable about complying with the language in part 43.13 and maybe elsewhere. If you disagree with their position you should ask that person to explain why they believe what the radio must be TSO'ed. You likely are getting many options expressed because different people interpret part 43 requirements in different ways, and in some cases may be dealing with local FSDO preferences for 337 paperwork which might further encourage caution on the part of the A&P. I would find a competent A&P you trust and follow the requirements/procedures they recommended. Darryl |
#3
|
|||
|
|||
![]()
On Mar 22, 3:05*am, Darryl Ramm wrote:
On Mar 21, 7:12*pm, sky wrote: What are the FAA regulations regarding installing a communications radio in a certified glider. *I have had many opinions expressed and would appreciate any definitive answers with references to the appropriate regulations. Part 43 requires an A&P to at a minimum sign off the installation, maybe do a 337. I believe there is no actual requirement to have a TSO radio. However your A&P/avionics shop may disagree. They may require the radio be TSO'ed to feel comfortable about complying with the language in part 43.13 and maybe elsewhere. If you disagree with their position you should ask that person to explain why they believe what the radio must be TSO'ed. You likely are getting many options expressed because different people interpret part 43 requirements in different ways, and in some cases may be dealing with local FSDO preferences for 337 paperwork which might further encourage caution on the part of the A&P. I would find a competent A&P you trust and follow the requirements/procedures they recommended. Darryl The shop where I work just installed an non TSO radio in a glider. I asked the avionics "guru" (my boss) about it. He said there is no problem at all. Just paperwork issues. He has a great rapport with the FSDO so never any paperwork problems. Basically the installation requires a 337 and "field approval". He said somthing about providing "approved data" which can be as simple as the install manual. Cookie |
#4
|
|||
|
|||
![]()
On Mar 22, 4:56*am, "
wrote: On Mar 22, 3:05*am, Darryl Ramm wrote: On Mar 21, 7:12*pm, sky wrote: What are the FAA regulations regarding installing a communications radio in a certified glider. *I have had many opinions expressed and would appreciate any definitive answers with references to the appropriate regulations. Part 43 requires an A&P to at a minimum sign off the installation, maybe do a 337. I believe there is no actual requirement to have a TSO radio. However your A&P/avionics shop may disagree. They may require the radio be TSO'ed to feel comfortable about complying with the language in part 43.13 and maybe elsewhere. If you disagree with their position you should ask that person to explain why they believe what the radio must be TSO'ed. You likely are getting many options expressed because different people interpret part 43 requirements in different ways, and in some cases may be dealing with local FSDO preferences for 337 paperwork which might further encourage caution on the part of the A&P. I would find a competent A&P you trust and follow the requirements/procedures they recommended. Darryl The shop where I work just installed an non TSO radio in a glider. *I asked the avionics "guru" (my boss) about it. *He said there is no problem at all. *Just paperwork issues. *He has a great rapport with the FSDO so never any paperwork problems. *Basically the installation requires a 337 and "field approval". *He said somthing about providing "approved data" which can be as simple as the install manual. Cookie- Hide quoted text - - Show quoted text - Handheld radios that are frequently used in club gliders like the 2-33's are also not TSO'd either. I think the issue with a radio in a glider is more about the installation being approved rather than the radio device itself since many gliders do not have a radio listed on the minimum required instrumentation list. Just follow what the A&P that does your annual says or get one that agrees with your interpretation, just so long as it gets signed off and you are covered. If the rules are vague and open to interpretation then the FAA will have to revise them if they expect a particular result and are not getting it. Ray |
#5
|
|||
|
|||
![]()
Here are some questions that help clarify the answers to this issue:
(as annoying as this can be) 1) Is a radio "required" equipment for a day-VFR flight? (which covers 99.99% of all Glider flying; at least in the USA) 2) How is the glider in question certified (standard vs. experimental)? What do the FARs say about items #1 and #2 above? More importantly, what do they _not_ say about radios? (Hint: see 91.205, the sections of Part 91 that apply to the airspace you expect to fly in/through, and Part 43). --Noel P.S. Don't forget this "gotcha": Your weight and balance is technically affected by instrument changes in the cockpit. See the FARs about how you can re-calculate your W&B based on an "equipment list" and the instrument location (i.e. Arm or Datum point). Insurance companies or FAA inspectors may not look kindly on an incorrect equipment list or a W&B that doesn't take new items - like radios - into account. |
#6
|
|||
|
|||
![]() "noel.wade" wrote in message ... Here are some questions that help clarify the answers to this issue: (as annoying as this can be) 1) Is a radio "required" equipment for a day-VFR flight? (which covers 99.99% of all Glider flying; at least in the USA) 2) How is the glider in question certified (standard vs. experimental)? What do the FARs say about items #1 and #2 above? More importantly, what do they _not_ say about radios? (Hint: see 91.205, the sections of Part 91 that apply to the airspace you expect to fly in/through, and Part 43). --Noel P.S. Don't forget this "gotcha": Your weight and balance is technically affected by instrument changes in the cockpit. See the FARs about how you can re-calculate your W&B based on an "equipment list" and the instrument location (i.e. Arm or Datum point). Insurance companies or FAA inspectors may not look kindly on an incorrect equipment list or a W&B that doesn't take new items - like radios - into account. Just a reminder--- The FAA and the FCC have someting to say about this. Many radios that were found in gliders a few years ago are no longer legal for the FCC. Has to do with channel separation and stability. I don't recall the details anymore, but be wary of 360 channel radios and old radios. Hartley Falbaum |
#7
|
|||
|
|||
![]()
On Mar 22, 1:03*pm, "HL Falbaum" wrote:
"noel.wade" wrote in message ... Here are some questions that help clarify the answers to this issue: (as annoying as this can be) 1) Is a radio "required" equipment for a day-VFR flight? (which covers 99.99% of all Glider flying; at least in the USA) 2) How is the glider in question certified (standard vs. experimental)? What do the FARs say about items #1 and #2 above? *More importantly, what do they _not_ say about radios? (Hint: see 91.205, the sections of Part 91 that apply to the airspace you expect to fly in/through, and Part 43). --Noel P.S. *Don't forget this "gotcha": *Your weight and balance is technically affected by instrument changes in the cockpit. *See the FARs about how you can re-calculate your W&B based on an "equipment list" and the instrument location (i.e. Arm or Datum point). Insurance companies or FAA inspectors may not look kindly on an incorrect equipment list or a W&B that doesn't take new items - like radios - into account. Just a reminder--- The FAA and the FCC have someting to say about this. Many radios that were found in gliders a few years ago are no longer legal for the FCC. Has to do with channel separation and stability. I don't recall the details anymore, but be wary of 360 channel radios and old radios. Hartley Falbaum The 360 channel radio issue is very old news and since the aircraft under discussion is type certificated a A&P/radio shop will not install some old junker 360 channel radio. The radios that replaced the old 360 channel radios have 720 channel/25 KHz spacing. That is what most of us fly with now. However this does raise potential confusion since there is another change kicking around in VHF radio specifications to 8.33 KHz channel spacing. With changes in Europe and elsewhere to this 8KHz spacing (required above certain flight levels) you are starting to see affordable radios appear with this spacing capability. The upcoming Becker AR 6201 that replaces the 4201 is an example of that, with selectable 8/25kHz spacing. But no we relay don't need to worry about this in the USA. Still if I was in the market I'd be trying to wait for the AR 6201 (for other reasons than 8kHz capability, like dual frequency monitoring, compact size, etc.). As for FCC "equipment authorization" go to http://www.fcc.gov/oet/ea/fccid/ and for example type in B54, the code for Becker avionics, to see all the FCC approved devices. Darryl |
#8
|
|||
|
|||
![]()
On Mar 22, 11:30*am, "noel.wade" wrote:
Here are some questions that help clarify the answers to this issue: (as annoying as this can be) 1) Is a radio "required" equipment for a day-VFR flight? (which covers 99.99% of all Glider flying; at least in the USA) 2) How is the glider in question certified (standard vs. experimental)? What do the FARs say about items #1 and #2 above? *More importantly, what do they _not_ say about radios? (Hint: see 91.205, the sections of Part 91 that apply to the airspace you expect to fly in/through, and Part 43). --Noel P.S. *Don't forget this "gotcha": *Your weight and balance is technically affected by instrument changes in the cockpit. *See the FARs about how you can re-calculate your W&B based on an "equipment list" and the instrument location (i.e. Arm or Datum point). Insurance companies or FAA inspectors may not look kindly on an incorrect equipment list or a W&B that doesn't take new items - like radios - into account. All, Thanks for the responses. To be clear, the radio would be a new 760 channel aircraft like the Microair 760 -approved by the FCC but not TSOed.. The glider is certified standard. I know handhelds do not require FAA approval but do require FCC approval and no one has ever suggested that using them for communications during flight is not legal. I understand the need that the installation be signed off by a FAA licensed mechanic to insure it is wired safely, mounted securely, and W&B updated but otherwise I do not understand why TSO certification should be required as the radio is not part of a minimum equipment list. |
#9
|
|||
|
|||
![]() Why wait? - you can get an ATR833 from Funkwerk (Filser)with 8khz spacing right now. Dual channel works well - not overly expensive - been on the market a year already. For 25khz spacing the ATR500 is affordable (40% less than an 833), and has pretty much the same features. Very low current draw, works to low voltage etc. Very popular radio in this part of the world. Bruce Darryl Ramm wrote: On Mar 22, 1:03 pm, "HL Falbaum" wrote: "noel.wade" wrote in message ... Here are some questions that help clarify the answers to this issue: (as annoying as this can be) 1) Is a radio "required" equipment for a day-VFR flight? (which covers 99.99% of all Glider flying; at least in the USA) 2) How is the glider in question certified (standard vs. experimental)? What do the FARs say about items #1 and #2 above? More importantly, what do they _not_ say about radios? (Hint: see 91.205, the sections of Part 91 that apply to the airspace you expect to fly in/through, and Part 43). --Noel P.S. Don't forget this "gotcha": Your weight and balance is technically affected by instrument changes in the cockpit. See the FARs about how you can re-calculate your W&B based on an "equipment list" and the instrument location (i.e. Arm or Datum point). Insurance companies or FAA inspectors may not look kindly on an incorrect equipment list or a W&B that doesn't take new items - like radios - into account. Just a reminder--- The FAA and the FCC have someting to say about this. Many radios that were found in gliders a few years ago are no longer legal for the FCC. Has to do with channel separation and stability. I don't recall the details anymore, but be wary of 360 channel radios and old radios. Hartley Falbaum The 360 channel radio issue is very old news and since the aircraft under discussion is type certificated a A&P/radio shop will not install some old junker 360 channel radio. The radios that replaced the old 360 channel radios have 720 channel/25 KHz spacing. That is what most of us fly with now. However this does raise potential confusion since there is another change kicking around in VHF radio specifications to 8.33 KHz channel spacing. With changes in Europe and elsewhere to this 8KHz spacing (required above certain flight levels) you are starting to see affordable radios appear with this spacing capability. The upcoming Becker AR 6201 that replaces the 4201 is an example of that, with selectable 8/25kHz spacing. But no we relay don't need to worry about this in the USA. Still if I was in the market I'd be trying to wait for the AR 6201 (for other reasons than 8kHz capability, like dual frequency monitoring, compact size, etc.). As for FCC "equipment authorization" go to http://www.fcc.gov/oet/ea/fccid/ and for example type in B54, the code for Becker avionics, to see all the FCC approved devices. Darryl --- news://freenews.netfront.net/ - complaints: --- |
#10
|
|||
|
|||
![]()
I installed one of Tim's factory refurbished Microairs last month. I
am loving it. Like you, I did all of this research and as an A & P I said why not? The microair beats my might fine Vertex handheld all day long. I especially enjoy the remote frequency select button on the control stick and the dual frequency monitor features. XF |
Thread Tools | |
Display Modes | |
|
|
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
Why don't voice radio communications use FM? | Mxsmanic | Piloting | 399 | September 13th 06 10:58 PM |
Accident Statistics: Certified vs. Non-Certified Engines | Ron Wanttaja | Home Built | 23 | January 18th 04 05:36 PM |
AirCraft Radio Communications | [email protected] | Rotorcraft | 0 | November 13th 03 12:48 AM |
Radio license required? | Marty Ross | Instrument Flight Rules | 10 | July 17th 03 09:58 PM |
Radio license required? | Marty Ross | Piloting | 10 | July 17th 03 09:58 PM |