If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
Fine example of Tarver Engineering release for service
A fine example of the quality results of Tarver Engineering work. As
singed off by John Tarver with applicable 8130. http://www.aart-jan.net/images/aart_...egtuigwrak.jpg photograph courtesy of Aart-Jan, (its not tarver in the pic, it's Aart's father inspecting the fine work completed by John "the splap" Tarver). |
#2
|
|||
|
|||
"running with scissors" wrote in message om... A fine example of the quality results of Tarver Engineering work. As singed off by John Tarver with applicable 8130. You can't even get the name of the FAA form correct, loser. |
#3
|
|||
|
|||
"Tarver Engineering" wrote in message ...
"running with scissors" wrote in message om... A fine example of the quality results of Tarver Engineering work. As singed off by John Tarver with applicable 8130. You can't even get the name of the FAA form correct, loser. Federal Aviation Administration Form 8130-3 Airworthiness Approval Tag in short referred to as an "8130" if you were active in the industry you would know that. thanks for playing john. idiot |
#4
|
|||
|
|||
On 26 Feb 2004 10:57:21 -0800,
(running with scissors) wrote: "Tarver Engineering" wrote in message ... "running with scissors" wrote in message om... A fine example of the quality results of Tarver Engineering work. As singed off by John Tarver with applicable 8130. You can't even get the name of the FAA form correct, loser. Federal Aviation Administration Form 8130-3 Airworthiness Approval Tag in short referred to as an "8130" if you were active in the industry you would know that. thanks for playing john. idiot Sh!t. I'm on the other side of the planet and I can find that in less than 30 seconds: http://www.faa.gov/certification/aircraft/8130-3.pdf Phil -- Great Tarverisms #5 Retarding the throttles will cease the engines from adding thrust, my silly rodent. Reducing pilot workload gives the Operator more time to deploy Spoiler Flaps into a Speed Brake configuration. Not like your Piper at all. John alt.disasters.aviation 9 Mar 2001 |
#5
|
|||
|
|||
"sub-idiot Phil Miller" wrote in message ... Sh!t. I'm on the other side of the planet and I can find that in less than 30 seconds: http://www.faa.gov/certification/aircraft/8130-3.pdf Very good sub-idiot miller. Now go find the URLs for an 8130-1 and an 8130-9. The term 8130 is incomplete. Besides that, a return to service is from a 337. So many incompetents, so little time ... |
#6
|
|||
|
|||
On Thu, 26 Feb 2004 19:28:14 -0800, "Tarver Engineering"
wrote: "sub-idiot Phil Miller" wrote in message .. . Sh!t. I'm on the other side of the planet and I can find that in less than 30 seconds: http://www.faa.gov/certification/aircraft/8130-3.pdf Very good sub-idiot miller. Now go find the URLs for an 8130-1 and an 8130-9. Too easy! http://www.faa.gov/certification/air...ss_Export2.htm Since I'm being so nice to you how about supplying us with a URL that references P1T0? Phil -- Great Tarverisms #4 The pitot tube was added to the first American jets to prevent the kind of failures that killed an entire squadron off Florida. Without P1 and T0 a jet will stall in fog. Thanks to both of you for playing. John rec.aviation.military 11 August 2002 |
#7
|
|||
|
|||
"Tarver Engineering" wrote in message ...
"sub-idiot Phil Miller" wrote in message ... Sh!t. I'm on the other side of the planet and I can find that in less than 30 seconds: http://www.faa.gov/certification/aircraft/8130-3.pdf Very good sub-idiot miller. Now go find the URLs for an 8130-1 and an 8130-9. The term 8130 is incomplete. no the term 8130 refers to the airworthiness, whichever 8130 you may care to refer to, they relate to airworthiness, application for, export of. the term 8130 refers to airwrorthiness whichever way you cut it. there is no confusing except in your deluded, tiny mind. everybody in aviation knows what an 8130 refers to and is. except you, funnily enough. no suprise there then. Besides that, a return to service is from a 337. utter ****ing ********.a 337 is for a major repair or alteration. So many incompetents, so little time ... and you are the king! |
#8
|
|||
|
|||
Tarver Engineering wrote: "sub-idiot Phil Miller" wrote in message ... Sh!t. I'm on the other side of the planet and I can find that in less than 30 seconds: http://www.faa.gov/certification/aircraft/8130-3.pdf Very good sub-idiot miller. Now go find the URLs for an 8130-1 and an 8130-9. The term 8130 is incomplete. Besides that, a return to service is from a 337. So many incompetents, so little time ... Since you're active in the industry, help me here, what is the regulatory form that the FAA uses to issue an instrument approach procedure? |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Fine example of Tarver Engineering release for service | running with scissors | Instrument Flight Rules | 64 | March 3rd 04 05:01 AM |