![]() |
If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#2
|
|||
|
|||
![]()
Needs to be an indicator with a course resolver in it. The 12D will
drive this kind of indicator... I think the ID-824 has a resistive course selector which the 12D will drive but not the 89B. There is a Narco indicator with the course resolver, but I've never actually seen one. Indicators that would work: KI-206, KNI-520 Collins ID-351; other older Collins or Bendix like the IN-245 or other ARINC standard TSO indicators. It is an unfortunate situation!! Bill Hale N7936T wrote: I bought a kln 89b. I have a MK12d driving a ID-824, a KX-170 driving a KI-214, and a yellow taged Arc IN-385a sitting on the self. I have a NAT multi pole relay, annunicator lights and switches. First choice would be to share the ID-824 between the MK12d and the 89b? If none of these will work, which indictor could should I watch for that wouldn't cost a fortune. :?: Anyone have the pinouts for the KI-214? or the IN-385a? |
Thread Tools | |
Display Modes | |
|
|