![]() |
If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
|
#1
|
|||
|
|||
![]()
On Saturday, January 16, 2016 at 6:00:40 AM UTC-8, Greg Delp wrote:
Same exact problem for mine as well. There are no SC wires. I assume most likely it will need a firmware update. I haven't had the chance to ask Uros yet. New remote stick comes without standard SC cable. There is no more need to solder these wires, as they are programmable through LX90xx/S80/8 software. In order to make it work, please check following setting. Go to Setup-Hardware-Variometer and make sure that none of input is set to "SC on/off switch" or "SC toggle button". Remote stick will not operate, until is registered on device. Remote stick can be registered under setup - hardware - Remote stick. Registration must be done on each unit (S80 and S80D Richard www.craggyaero.com |
Thread Tools | |
Display Modes | |
|
|
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
Looking for recommendation on stick grip | Doug[_9_] | Soaring | 8 | June 11th 15 10:31 PM |
Stick grip loose - help how do I attach it properly? | Johan Pretorius | Soaring | 8 | March 29th 14 10:51 PM |
ME109 Stick Grip for sale | Chris Jamesson | Military Aviation | 4 | August 12th 10 06:10 PM |
control stick (complete not only grip) from mig-21 | papcio | Aviation Marketplace | 0 | May 3rd 04 07:08 PM |
B-8 stick grip buttons | B2431 | Military Aviation | 4 | December 16th 03 10:15 AM |