If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#11
|
|||
|
|||
Mode S transponder display to ATC?
"Thomas Borchert" wrote in message
... Paul, Is it normal practice for a Mode S transponder to display the aircraft tail number to ATC? Mode S transponder have the option of setting a flight ID or the tail number in a data field designated for that info. This is broadcast with the Mode S data packet and is independent of the unique transponder hex code. In airline operations, the flight crew normally sets the flight ID for each flight, e.g. UA011 for United flight 011. In GA operations, the aircraft tailnumber is set by the installer. Controllers with mode S radar equipment have the option of displaying this data field next to the "blip". I do not know how common such equipment is in the US, but it is getting more and more widespread in Europe. It doesn't exist anywhere in the US. I seriously doubt it will ever be implemented as ADS-B which has a much more robust datalink capability will be the shape of things to come. |
#12
|
|||
|
|||
Mode S transponder display to ATC?
On 2008-09-05, Thomas Borchert wrote:
Mode S transponder have the option of setting a flight ID or the tail number in a data field designated for that info. This is broadcast with the Mode S data packet and is independent of the unique transponder hex code. In airline operations, the flight crew normally sets the flight ID for each flight, e.g. UA011 for United flight 011. In GA operations, the aircraft tailnumber is set by the installer. In the US, the tail number is assigned an 8-digit octal number to be used as the flight ID algorithmically by the FAA. I don't know what other countries do. Since it's algorithmic, it's possible to go backward from ID 51577524 to N55ZC. Controllers with mode S radar equipment have the option of displaying this data field next to the "blip". I do not know how common such equipment is in the US, but it is getting more and more widespread in Europe. Apparently, it's not used in the US at all. AFAIK, the big database correlating call signs and hex codes inside the radar equipment is a myth. If other countries do it the way the FAA does, there's no need for a database. -- Jay Maynard, K5ZC http://www.conmicro.com http://jmaynard.livejournal.com http://www.tronguy.net Fairmont, MN (FRM) (Yes, that's me!) AMD Zodiac CH601XLi N55ZC |
#13
|
|||
|
|||
Mode S transponder display to ATC?
Jay,
In the US, the tail number is assigned an 8-digit octal number to be used as the flight ID algorithmically by the FAA. Hmm. Do you have a source for that? Since every airline flight using a flight number rather than a tail number for the flight ID field in the mode S data packet would break that algorithm, it doesn't make much sense to use it in the first place. -- Thomas Borchert (EDDH) |
#14
|
|||
|
|||
Mode S transponder display to ATC?
On 2008-09-05, Thomas Borchert wrote:
In the US, the tail number is assigned an 8-digit octal number to be used as the flight ID algorithmically by the FAA. Hmm. Do you have a source for that? Not directly, but I got curious to see how it was assigned, and started poking at the FAA registration database (which includes the assigned code). The algorithm winds up assigning 50000001 to N1, 50000002 to N1A, 50000003 to N1AA, 50000004 to N1AB,... 50000032 to N1AZ, 50000033 to N1B, 50000034 to N1BA,... 50001131 to N1ZZ, 50001132 to N10, 50001133 to N10A, and so on. I never got to the point of writing C code that would generate the code, but it would be fairly straightforward. The algorithm depends on the rules for assigning N numbers, and works left to right, with the letters in order from A to Z (skipping I and O), then 0-9, taking all of the letter combinations in order before expanding the number field. Since every airline flight using a flight number rather than a tail number for the flight ID field in the mode S data packet would break that algorithm, it doesn't make much sense to use it in the first place. It saves having an application process for a code separate from the registration process. They have to come up with the number from somewhere, and since they have a block big enough to accommodate every possible N number, it works out easiest that way. -- Jay Maynard, K5ZC http://www.conmicro.com http://jmaynard.livejournal.com http://www.tronguy.net Fairmont, MN (FRM) (Yes, that's me!) AMD Zodiac CH601XLi N55ZC |
#15
|
|||
|
|||
Mode S transponder display to ATC?
"Jay Maynard" wrote in message
... On 2008-09-05, Thomas Borchert wrote: In the US, the tail number is assigned an 8-digit octal number to be used as the flight ID algorithmically by the FAA. Hmm. Do you have a source for that? Not directly, but I got curious to see how it was assigned, and started poking at the FAA registration database (which includes the assigned code). The algorithm winds up assigning 50000001 to N1, 50000002 to N1A, 50000003 to N1AA, 50000004 to N1AB,... 50000032 to N1AZ, 50000033 to N1B, 50000034 to N1BA,... 50001131 to N1ZZ, 50001132 to N10, 50001133 to N10A, and so on. I never got to the point of writing C code that would generate the code, but it would be fairly straightforward. The algorithm depends on the rules for assigning N numbers, and works left to right, with the letters in order from A to Z (skipping I and O), then 0-9, taking all of the letter combinations in order before expanding the number field. There's no need as it's already been done and put online. http://www.airframes.org/ Since every airline flight using a flight number rather than a tail number for the flight ID field in the mode S data packet would break that algorithm, it doesn't make much sense to use it in the first place. It saves having an application process for a code separate from the registration process. They have to come up with the number from somewhere, and since they have a block big enough to accommodate every possible N number, it works out easiest that way. This is exactly correct. The registration number and the MODES ICAO ID are one and the same. The ICAO ID can also be used to selectively address the transponder (the S in ModeS stands for "select"). So one particular transponder may be interrogated exclusively by using the unique ICAO ID. Part of the reason for this is the FAA was concerned about transponder saturation in areas that have a high density of sensors. The theory was that a ModeS transponder could be selectively interrogated by one sensor, and that sensor would share that position data with other sensors within range. This technology was never implemented in the US for a few reasons, but that capability still exists within the transponder standard. |
#16
|
|||
|
|||
Mode S transponder display to ATC?
On 2008-09-05, Mike wrote:
"Jay Maynard" wrote in message Not directly, but I got curious to see how it was assigned, and started poking at the FAA registration database (which includes the assigned code). The algorithm winds up assigning 50000001 to N1, 50000002 to N1A, 50000003 to N1AA, 50000004 to N1AB,... 50000032 to N1AZ, 50000033 to N1B, 50000034 to N1BA,... 50001131 to N1ZZ, 50001132 to N10, 50001133 to N10A, and so on. I never got to the point of writing C code that would generate the code, but it would be fairly straightforward. The algorithm depends on the rules for assigning N numbers, and works left to right, with the letters in order from A to Z (skipping I and O), then 0-9, taking all of the letter combinations in order before expanding the number field. There's no need as it's already been done and put online. http://www.airframes.org/ Well, it appears he's written the code, but it doesn't appear to be available...I'd like to see the actual code, just to check if my thoughts on the programming required to go in the reverse direction are correct. I'd also like to see if other countries assign their codes algorithmically. -- Jay Maynard, K5ZC http://www.conmicro.com http://jmaynard.livejournal.com http://www.tronguy.net Fairmont, MN (FRM) (Yes, that's me!) AMD Zodiac CH601XLi N55ZC |
#17
|
|||
|
|||
Mode S transponder display to ATC?
"Jay Maynard" wrote in message
... On 2008-09-05, Mike wrote: "Jay Maynard" wrote in message Not directly, but I got curious to see how it was assigned, and started poking at the FAA registration database (which includes the assigned code). The algorithm winds up assigning 50000001 to N1, 50000002 to N1A, 50000003 to N1AA, 50000004 to N1AB,... 50000032 to N1AZ, 50000033 to N1B, 50000034 to N1BA,... 50001131 to N1ZZ, 50001132 to N10, 50001133 to N10A, and so on. I never got to the point of writing C code that would generate the code, but it would be fairly straightforward. The algorithm depends on the rules for assigning N numbers, and works left to right, with the letters in order from A to Z (skipping I and O), then 0-9, taking all of the letter combinations in order before expanding the number field. There's no need as it's already been done and put online. http://www.airframes.org/ Well, it appears he's written the code, but it doesn't appear to be available...I'd like to see the actual code, just to check if my thoughts on the programming required to go in the reverse direction are correct. I'd also like to see if other countries assign their codes algorithmically. The algorithm is part of the ICAO standard, so if other countries aren't doing this, they are doing so outside the standard. If you could find the written version of the standard in the ICAO conventions, it would probably verify your suspicions, but ICAO standards are a bit hard to find without paying for a copy as ICAO would like you to do. |
#18
|
|||
|
|||
Mode S transponder display to ATC?
On 2008-09-05, Mike wrote:
The algorithm is part of the ICAO standard, so if other countries aren't doing this, they are doing so outside the standard. Uhm...since the US algorithm is quite dependent on the US rules for assigning registration numbers, it would not work at all for, say, the UK. (Although, in fairness, the UK's algorithm, as well as that for countries that use all-alphabetic registration systems, would be quite a lot simpler than the US one.) That either says it's not in the ICAO standard, or else there's more than one. -- Jay Maynard, K5ZC http://www.conmicro.com http://jmaynard.livejournal.com http://www.tronguy.net Fairmont, MN (FRM) (Yes, that's me!) AMD Zodiac CH601XLi N55ZC |
#19
|
|||
|
|||
Mode S transponder display to ATC?
"Jay Maynard" wrote in message
... On 2008-09-05, Mike wrote: The algorithm is part of the ICAO standard, so if other countries aren't doing this, they are doing so outside the standard. Uhm...since the US algorithm is quite dependent on the US rules for assigning registration numbers, it would not work at all for, say, the UK. (Although, in fairness, the UK's algorithm, as well as that for countries that use all-alphabetic registration systems, would be quite a lot simpler than the US one.) That either says it's not in the ICAO standard, or else there's more than one. I haven't read the standard, but the hard wired serial number in the ModeS transponder is refered to as the ICAO ID. I'm also quite sure the standard exists in the ICAO convention. |
#20
|
|||
|
|||
Mode S transponder display to ATC?
Peter writes:
The UK CAA have a public database linking Mode S codes with tail numbers (google on G-INFO) so it would be easy enough to trace a specific aircraft from the 24-bit ID. Odd that such a database would be public in a country that forbids listening to ATC. |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Garrecht Mode S transponder - USA? | Eric Greenwell | Soaring | 3 | August 20th 07 09:05 PM |
New transponder mode S vs. mode C | Tom N. | Soaring | 39 | November 7th 06 07:40 AM |
KT76C Mode C transponder - what is it worth? | Mike Rapoport | General Aviation | 1 | November 21st 04 05:56 AM |
KT76C Mode C transponder - what is it worth? | G.R. Patterson III | Owning | 0 | November 21st 04 05:56 AM |
WTB: Mode C Transponder | Chris Batcheller | Aviation Marketplace | 0 | February 21st 04 01:31 PM |